FGV lankstai jurga

FGV

Katalogai, dokumentai / Katalogai

Dalintis socialiniuose tinkluose

Dalintis nuoroda

Use permanent link to share in social media

Dalintis su draugu

Prašome login siųsti šį document el. paštu!

Įterpta į Jūsų tinklalapį

Pasirinkite puslapį, nuo kurio pradėsite

3. 10

9. 16

11. 18

101. 108

53. 60

78. 85 Values given in mm HINGES

30. 37 Values given in mm HINGES

74. 81 Values given in mm HINGES ANGLE -25°ANGLE -25° 110°110°

76. 83 Values given in mm HINGES 110° 110° ANGLE 90° ANGLE 45° ANGLE 24°÷30°

110. 117 Values given in mm HINGES ANGLE 24°÷30°ANGLE 45° ANGLE 90° 90° 90°

7. 14 Simple and ingenious Putting the damper into the least problematic zone of a hinge, namely under the mounting plate, is simply a genial design solution. No bulky hinge box – no protruding hinge arm. Simply Genios! Integral or add-on The product range is available with the damper pre-mounted into the mounting plate or as a retro fi table add-on solution, opening whole new perspectives for production and marketing. Simply Genios! Strong and adjustable The damper is very powerful to cope with large and heavy doors. Nonetheless, the strength can be adjusted to smaller and lighter doors. It is even possible to use the damper only on certain hinges. Simply Genios!

114. 121 Values given in mm HINGES ANGLE 24°÷30° ANGLE 45° ANGLE 90° 90° 90° SPECIAL SOLUTIONS .

92. 99 Values given in mm HINGES K C 3 4.5 4 5.5 5 6.5 6 7.5 7 8.5 95° 95° 95° 95° DOWN SOLUTION UP SOLUTION H A B 2 2.5 20 4 4.5 22 6 6.5 24 SPECIAL SOLUTIONS

4. 11 HINGES Genios is the innovative technology developed and patented by FGV to control the movement of concealed hinges. Genios is a new way to dampen hinges, and not being located in the hinge arm or in the hinge box, but in the formerly empty space underneath the mounting plate, this astute position generates a wealth of bene fi ts for the industry and for end-consumers. Genios is available on Optima Click and on MS Slide-On hinges. The Hidden Power G e n i o s V i d e o Genios Video

97. 104 Series MS Slide-On Attention: the picture shows the real product, the 3D drawing shows drilling and mounting instruction. Zamak linear mounting plate. Knock-in fi xing with dowels Ø10mm. Independent vertical adjustment. Height Material Code H=2 Zamak 52.0210.05.02.1 17,5 72 32 H 16.5 Ø10 18 Zamak linear mounting plate. Knock-in fi xing with dowels Ø8mm. Independent vertical adjustment. Height Material Code H=2 Zamak 52.0209.05.02.1 Ø8 1 6.5 17.5

115. 122 QS Mini 105° for doors with aluminium frame Technical speci fi cations: • Opening 105° • Aluminium frame (K) min. 3 to 6 mm LOCK FIXING CRANK 15 CRANK 8 CRANK 0 51.QS31.05.00.02000 51.QS31.05.08.02000 51.QS31.05.15.02000 Assembly instructions: Aluminium frame: The mounting plates and fi ttings for this hinge series are shown from page 124 to page 127.

51. 58 Steel cover for hinge box. Cup hole dist. Material Code 48-45 Steel 510C000500000 52 Steel 510C000500B00 Series Optima Click Ø35mm cover. Material Code Nylon 5307C3**00000 ** Colour code: A1 = White RAL 9010 / A2 = Brown RAL 8016 / C6 = Grey RAL 7004 / 0I = Painted matt aluminium Material Code Plastic 51.0M.00010.0000 Steel 51.0Y.00050.000N Stell with FGV logo* 51.0YFGV.5.0000000 *Customer logo on demand. Hinge arm cover. Spacer for mounting plates. 51 5° 42 Material Code Nylon 52.0SP6.06.05.000 Stackable to get multiples of 5°.

1. 8 Made in italy F o r m e n t i & G i o v e n z a n a V e d u g g i o

33. 40 Optima Click 105° for doors with aluminium frame Technical speci fi cations: • Depth of the zamak cup 9.9mm • Opening 105° • Aluminium frame from min. 19 to max 25 mm LOCK FIXING CRANK 15 51.XS81.05.15.0 CRANK 8 51.XS81.05.08.0 CRANK 0 51.XS81.05.00.0 Assembly instructions: Aluminium frame: The mounting plates and fi ttings for this hinge series are shown from page 46 to page 59.

89. 96 MS Slide-On 105° for doors with aluminium frame Technical speci fi cations: • Depth of the zamak cup 9.9mm • Opening 105° • Aluminium frame from min. 19 to max 25 mm LOCK FIXING CRANK 15 CRANK 8 CRANK 0 51.MS31.05.15.0 51.MS31.05.08.0 51.MS31.05.00.0 Assembly instructions: Aluminium frame: The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107.

8. HINGES 15 Keep your application and convert without hassle to Genios technology Thin or thick doors, light or heavy doors, Genios covers them all. Thanks to the possibility to choose the number of numbers and to fi ne-tune the adjustment with One-Step-Anyway feature, there is no application Genios doesn’t cover. Genios: the hidden power Placed under the previously empty space under the central hump of the mounting plate, the SlowMotion damper has no incidence on look or external dimensions of the hinge. Strength and adjustability are combined to deliver hidden force and majestic closing. Affordable No change in process, no need for costly thick doors, no “inbuilt gas-factory” in this rational and ingenious technology. And the choice between integral and add-on solution. All ingredients are together for the most affordable solution from the European leader of concealed hinges with an installed capacity of more than 250 Mio hinges in Veduggio . Drilling depth . Door thickness * 30mm in version MT / 26mm in standard *

46. 53 Values given in mm HINGES Asymmetric mounting plate for central panel. Fixing by dowels and premounted selftapping screws. Vertical adjustment. Height Material Code H=2 Steel 52.54N3.M5.02.0 H=4 Steel 52.54N3.M5.04.0 Ø5 28 Metal cruciform mounting plate. Knock-in fi xing with dowels Ø10mm. Vertical adjustment. Height Material Code H=4 Steel 52.04D1.M5.04.0 Ø10 28 Metal cruciform mounting plate. Knock-in fi xing with dowels Ø8mm. Vertical adjustment. Not compatible with SlowMotion solutions. Height Material Code H=4 Steel 52.04C1.M5.04.0 Ø8 28 Metal cruciform mounting plate. Selftapping screw fi xing. Independent vertical adjustment with CAM. Screws are provided on demand. Height Material Code H=2 Steel 52.R464.L5.02.0 H=4 Steel 52.R464.L5.04.0 28 MOUNTING PLATES

2. HINGES 9 Hinges are still the most effective way of articulating a cabinet door. With 250 Million hinges per year, FGV is the leading hinge manufacturer in Europe. The range covers all levels of requirement from the most sophisticated to the entry level. Recent innovations in terms of functionality like controlled movement of the door closing via dampening are adding further end-consumer appeal to the FGV range. With Optima Click , MS Slide-On and QS Mini hinges, the range cov ers all cabinet applications. Genios , SlowMotion and OneTouch technologies round-up an unrivalled program. Good-Better-Best solutions State of the art technology Design and functionality The Right Collection Hinges

81. 88 MS Slide-On 90° Ø40 for thick doors CRANK 15 CRANK 22 <<< CRANKS 0, 8 TO PAGE 86 CRANK 15 For lay-on doors CRANK 22 For partial lay-on doors 51.MN45.05.15.0 51.MN46.05.15.0 51.MN45.05.22.0 51.MN46.05.22.0 66 7.5 43 K 52 S CUP HOLE DISTANCE 52x7.5mm S S The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107. Ø35

52. 59 Values given in mm HINGES Selftapping screws with Pozi drive head, nickel for hinge and mounting plate fi xing. L Ø ØLength Material Code 412.5 Steel 1A035034150CF 415.5 Steel 1A035034250CF Euro screws with Pozi drive head, nickel for mounting plate fi xing. L Ø ØLength Material Code 6.3 10 Steel 1A075029350CF 6.3 12 Steel 1A075108250CF 6.3 14 Steel 1A075108150CF Euro screws with Pozi drive head, nickel for hinge fi xing. L Ø ØLength Material Code 6.3 12 Steel 1A075130050CF FITTINGS Dowel in nylon for hinge fi xing. H ØHeight Material Code 10 12 Nylon 2H011070530CF 811 Nylon 2H000449003CF

10. HINGES 17 Optima Click 18-59 MS Slide-On 60-107 QS Mini 108-127 SlowMotion accessories 129-147 Alfa 130 Delta 134 Zitto 138 OneTouch 142 Appendix Pictograms 166-167 Hinges Index The variety of hinges and mounting plates that Formenti & Giovenzana offers is certainly one of the most complete. For every hinge or mounting plate it is possible to select the fi xing system most suitable to the need. - Selftapping and euro screw: the standard - Dowel: for industrial insertion - Velo fi x and X-Pando dowel: to reduce the assembly time - Centra and Zip: for no-tool mounting

31. 38 Optima Click 105° for doors with aluminium frame Technical speci fi cations: • Depth of the zamak cup 9.9mm • Cup drilling 28x7mm • Opening 105° • Aluminium frame from min. 19 to max 25 mm • OneTouch solutions FIXING FOR GROOVED PROFILE CRANK 15 CRANK 8 CRANK 0 Assembly instructions: Drilling holes: The two laterals drillings are Ø4mm and are countersunk with 120°. Screws Ø3.5x12 mm supplied on demand under code 1A05512105000. 51.XS91.05.15.0 51.XS91.05.08.0 51.XS91.05.00.0 = G / Genios Solution The mounting plates and fi ttings for this hinge series are shown from page 46 to page 59.

87. 94 MS Slide-On 105° for doors with aluminium frame Technical speci fi cations: • Depth of the zamak cup 9.9mm • Cup drilling 28x7mm • Opening 105° • Aluminium frame from min. 19 to max 25 mm • Genios and OneTouch solutions FIXING FOR GROOVED PROFILE CRANK 15 CRANK 8 CRANK 0 51.MS41.05.15.0 51.MS41.05.08.0 51.MS41.05.00.0 Assembly instructions: Drilling holes: The two laterals drillings are Ø4mm and are countersunk with 120°. Screws 3.5x12mm supplied on demand under code 1A05512105000. The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107. = G / Genios Solution

13. 20 Optima Click +/- 2.5mm A +2/-6mm B C 1 2 L = door width H = door height Adjusting System Independent side adjustment Acting on the "B" screw it is possible to change the amount of the door covering on the side of the cabinet. Vertical adjustment Acting on the "C" screw of the mounting plate it is possible to adjust the door vertically. Depth adjustment Acting on the "A" screw it is possible to adjust the distance between the side of the cabinet and the door. Mounting System Place the front part of the hinge on the front side of the mounting plate. Rotate the arm of the hinge. 3 Press down the rear part of the hinge to Click on. +/- 2mm

96. 103 Values given in mm HINGES Metal cruciform mounting plate. Knock-in fi xing with dowels Ø8mm. Vertical adjustment. Ø8 Height Material Code H=4 Steel 52.02C1.M5.04.1 28 Metal cruciform mounting plate. Knock-in fi xing with dowels Ø10mm. Vertical adjustment. Ø10 Height Material Code H=4 Steel 52.02D1.M5.04.1 28 MOUNTING PLATES Asymmetric mounting plate for central panel. Fixing by dowels and selftapping screws. Vertical adjustment. Ø5 Height Material Code H=2 Steel 52.52N3.M5.02.1 H=4 Steel 52.52N3.M5.04.1 28 Ø5 Zamak cruciform mounting plate with 30° inclination. Euro screws premounted. Vertical adjustment. * C = 14 12 10 D =H = Angolo Material Code 30° Zamak 52.0266.05.24. * 28

6. HINGES 13 Ms Slide-On Genios An affordable solution MS/Slide-On hinges are a part of the world’s leading volume manufacturer of quality hinges. Over 30 million cabinets are equipped year on year by this hinge range. One hundred million hinges are produced in Veduggio on the latest automatic equipment. A quality solution MS/Slide-On hinges from FGV are easy to use. They are all certi fi ed to the highest quality standards in terms of performance and longevity and are guaranteed for 80.000 cycles during their lifetime. The range covers all applications, including corner solutions. Adjustable impact The damper is very powerful to cope with large and heavy doors. Nonetheless, the strength can be adjusted to smaller and lighter doors. The regulation can be made, adjusting the screw on the back of the damping housing. Not 100% or 0%, but a real progressi ve adjustment. A clear advantage for an overall very affordable solution. Pre-mounted or retro fi t The product range is available with the damper pre-mounted into the mounting plate or as a retro fi t able add-on solution, opening whole new perspectives for production and marketing. Stock holding is simpli fi ed, for manufacturer and for hardware dealer. Sales margins can be optimised with separate sales.

55. 62 MS Slide-On +/- 2.5mm A +2/-6mm B C Independent side adjustment Acting on the "B" screw it is possible to change the amount of the door covering on the side of the cabinet. Vertical adjustment Acting on the "C" screw of the mounting plate it is possible to adjust the door vertically. Front adjustment Acting on the "A" screw it is possible to adjust the distance between the side of the cabinet and the door. 1 Place the rear part of the hinge on the front side of the mounting plate. 2 Let the hinge slide on the mounting plate until it stops. 3 Tighten the connecting screw. Adjusting System Mounting System L = door width H = door height +/- 2mm

104. 111 HINGES INDEX FOR WOOD DOORS 105° Ø26 Summary table p. 112 Product detail p. 114 FOR WOOD CORNER 90° Summary table p. 112 Product detail p. 116 FOR GLASS DOORS 105° Ø26 Summary table p. 113 Product detail p. 118 FOR GLASS CORNER 90° Summary table p. 113 Product detail p. 120 FOR DOORS WITH ALUMINIUM FRAME 105° Summary table p. 113 Product detail p. 122 SPECIAL SOLUTIONS ZIP FIXING SYSTEM Summary table p. 113

85. 92 MS Slide-On 90° Ø26 for glass doors Technical speci fi cations: • Thickness of the glass doors (T) from 4 to 5 mm • Cup diameter 26mm • Opening 90° • Possibility of door drilling (K) from 3 to 5 mm CRANK 0 CRANK 8 CRANK 15 51.MG11.2*.15.0 51.MG11.2*.08.0 51.MG11.2*.00.0 * 1 = White / 3 = Black NYLON (glass) N N NYLON (glass) K The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107. Ø26 5

100. 107 Values given in mm HINGES FITTINGS Ø35mm cover. Material Code Nylon 5307C3**00000 ** Colour code: A1 = White RAL 9010 / A2 = Brown RAL 8016 / C6 = Grey RAL 7004 / 0I = Painted matt aluminium Euro screws with Pozi drive head, nickel for hinge fi xing. Dowel in nylon for hinge fi xing. H ØHeight Material Code 10 12 Nylon 2H011070530CF 811 Nylon 2H000449003CF Selftapping screws with Pozi drive head, nickel for hinge and mounting plate fi xing. L Ø ØLength Material Code 412.5 Steel 1A035034150CF 415.5 Steel 1A035034250CF Euro screws with Pozi drive head, nickel for mounting plate fi xing. ØLength Material Code 6.3 10 Steel 1A075029350CF 6.3 12 Steel 1A075108250CF 6.3 14 Steel 1A075108150CF L Ø ØLength Material Code 6.3 12 Steel 1A075130050CF L Ø

5. 12 Optima Click Genios All the bene fi ts from the Optima hinge range Optima is the top range hinge of FGV. Its timeless design is completed with features like SafeClick fast assembly and One-Step 3D adjustment. Genios is resetting the agenda on integral damped hinges. A technology to cover every application Genios is available with all cranks and angled hinges, it works with framed doors, alu-frame doors and its extra fl at arm works with inbuilt fridge con fi gurations, as well as with English drawer situations. Thanks to One-Step-Anyway in and out adjustment, Genios copes with every door size and weight. No modi fi cations in the processing Don’t touch your machines! Don’t go back to the drawing board. Keep your standard Optima hinge application and replace the current mounting plate by the Genios. Drilling depth, overlay and opening angles are unchanged. Genios doesn’t require special solutions. It works with extra thin panels from 16mm to 30mm door thickness without any change in your applications. Integral solution or add-on: your choice! The mounting plate can come pre-assembled with the SlowMotion damper or ready for add-on. Choose the number of damped hinges easily to fi t door size and weight. Choose your marketing option of the damping feature: integral or add-on.

91. 98 MS Slide-On 95° for fl ap doors Technical speci fi cations: • Depth of the metal cup 11.3mm • Cup diameter 35mm • Possibility of door drilling (K) from 3 to 7 mm • Thickness of the door (T) from 16 to 26 mm 32 16.5 B A K Ø35 T 32 11 S C X Assembly instructions: Drilling holes: 51.MN57.L9.00000 LEFT 51.MN57.R9.00000 RIGHT The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107.

103. 110 QS Mini +/- 2,5mm A -2/+6mm B C Independent side adjustment Acting on the "B" screw it is possible to change the amount of the door covering on the side of the cabinet. Vertical adjustment Acting on the "C" screw of the mounting plate it is possible to adjust the door vertically. Front adjustment Acting on the "A" screw it is possible to adjust the distance between the side of the cabinet and the door. 1 3 Place the rear part of the hinge on the front side of the mounting plate. 2 Let the hinge slide on the mounting plate until it stops. Tighten the connecting screw. Adjusting System Mounting System L = door width H = door height +/- 2.5mm A +2/-6mm B C +/-2mm

98. 105 Values given in mm HINGES 1 2 .5 Metal mounting plate. Selftapping screw fi xing. Vertical adjustment. Screws are provided on demand. Height Material Code H=2 Steel 52.0232.M5.02.1 H=5 Zamak 52.0232.05.05.1 MOUNTING PLATES SPECIAL SOLUTIONS Zamak cruciform mounting plate. Selftapping screw fi xing. Vertical adjustment. Screws are provided on demand. 28.5 37 37 Zamak cruciform mounting plate. Selftapping screw fi xing. Vertical adjustment. Screws are provided on demand. 28 37.5 77 28 32 51 All applications are available on demand. All applications are available on demand. Spacer for mounting plates. 51 5° 42 Material Code Nylon 52.0SP6.06.05.000 Stackable to get multiples of 5°.

111. 118 QS Mini 105° for glass doors Technical speci fi cations: • Nylon cup • Cup diameter 26mm • Opening 105° • Possibility of door drilling (K) from 3 to 6 mm • Thickness of the glass door (T) from 4 to 5 mm CRANK 0 CRANK 8 CRANK 15 51.QS51.2 * .00.0200 * 1 = White / 3 = Black 51.QS51.2 * .08.0200 51.QS51.2 * .15.0200 N NYLON (glass) K The mounting plates and fi ttings for this hinge series are shown from page 124 to page 127. NYLON (glass) N Ø26 5

95. 102 Series MS Slide-On Metal cruciform mounting plate. Euro screws premounted. Vertical adjustment. Ø5 * C = 14 12 10 D =H = Height Material Code H=4 Steel 52.0221.M5.04. * 28 Metal cruciform mounting plate. Fixing by expanding X-Pando dowels Ø5mm. Vertical adjustment. Ø5 Height Material Code H=4 Steel 52.02N1.M5.04. * * 1 = 3 = 9.2 7.5 28 Asymmetric mounting plate for central panel. Fixing by dowels and selftapping screws. Vertical adjustment. Ø5 Height Material Code H=2 Steel 52.52N7.M5.02.1 H=4 Steel 52.52N7.M5.04.1 37 Attention: the picture shows the real product, the 3D drawing shows drilling and mounting instruction. Metal cruciform mounting plate. Premounted selftapping screws Ø4.7mm. Vertical adjustment. Height Material Code H=4 Steel 52.02G1.M5.04.1 28 51 32 28 H Ø3 56

113. 120 QS Mini 90° for glass corner doors Technical speci fi cations: • Nylon cup • Cup diameter 26mm. • Opening 90° • Possibility of door drilling (K) from 3 to 5 mm. • Thickness of the glass door (T) from 4 to 5 mm. ANGLE 24°÷30° ANGLE 45° ANGLE 90° 51.QS51.2 * .24.0000 * 1 = White / 3 = Black 51.QS51.2 * .45.0000 51.QS51.2 * .90.0000 N NYLON (glass) K The mounting plates and fi ttings for this hinge series are shown from page 124 to page 127. NYLON (glass) N Ø26 5

99. 106 Series MS Slide-On Steel cover for hinge box. Cup hole dist. Material Code 48-45 Steel 510C000500000 52 Steel 510C000500B00 Material Code Plastic 51.0M.00010.0000 Steel 51.0Y.00050.000N Steel with FGV Logo* 51.0YFGV.5.0000000 *Customer logo on demand Plastic or Steel hinge arm cover. Round face plate for glass door hinge. Colour Code Bright chrome 51.0150.05.01R.00 Matt chrome 51.0150.0G.01R.00 Bright gold 51.0150.04.01R.00 Black painted 51.0150.08.01R.00 Black RAL 9005 51.0150.0T.01R.00 White RAL 9016 51.0150.01.01R.00 Metallized bright chrome 51.0150.0K.01R.00 Metallized bright gold 51.0150.0H.01R.00 Matt chrome painted 51.0150.0J.01R.00 Matt nickel 51.0150.06.01R.00 Oval face plate for glass door hinge. Colour Code Bright chrome 51.0150.05.01D.00 Matt chrome 51.0150.0G.01D.00 Bright gold 51.0150.04.01D.00 Black painted 51.0150.08.01D.00 Black RAL 9005 51.0150.0T.01D.00 White RAL 9016 51.0150.01.01D.00 Metallized bright chrome 51.0150.0K.01D.00 Metallized bright gold 51.0150.0H.01D.00 Matt chrome painted 51.0150.0J.01D.00 Matt nickel 51.0150.06.01D.00

79. 86 MS Slide-On 90° Ø40 for thick doors Technical speci fi cations: • Depth of the metal cup 12.8mm • Cup diameter 40mm • Opening 90° • Possibility of door drilling (K) from 3 to 15 mm • Thickness of the door (T) from 16 to 40 mm • OneTouch solutions CRANK 0 CRANK 8 CRANKS 15, 22 TO PAGE 88 >>> CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors 51.MN45.05.00.0 51.MN46.05.00.0 51.MN45.05.08.0 51.MN46.05.08.0 66 7.5 43 K 52 S CUP HOLE DISTANCE 52x7.5mm S S The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107. Ø35

37. 44 Optima Click 90° Ø40 for thick doors CRANK 15 CRANK 22 <<< CRANK 0, 8 TO PAGE 42 CRANK 15 For partial lay-on doors CRANK 22 For inset doors S S 51.XH45.05.15.0 51.XH46.05.15.0 51.XH45.05.22.0 51.XH46.05.22.0 66 7.5 43 K 52 S CUP HOLE DISTANCE 52x7.5mm / * 2 ; / 2 ; * /$    /$    The mounting plates and fi ttings for this hinge series are shown from page 46 to page 59.

102. 109 HINGES Low depth cup for thin doors Wide range 3D door adjustment Large range of cup- fi xing methods Complete range of hinges & mounting plates Q S QS M i n i Mini T h e r i g h t s i z e The right size QS Mini hinges with Ø26mm cup size are compact, performing and cost ef fi cient. The small size allows the use on extra thin doors, but the performance is good enough to cover also standard doors in all usual sizes. QS mini-hinges are the perfect solution for bathroom, bedroom and living room applications with entry level to mid-level speci fi cations. With pre-mounted euro-screws or self-taping screws, they are the perfect fl at-pack furniture hinge.

50. 57 Values given in mm HINGES SPECIAL SOLUTIONS Zamak mounting plate. Selftapping screw fi xing. Vertical adjustment. Screws are provided on demand. Height Material Code H=2 Zamak 52.0432.05.02.0 H=5 Zamak 52.0432.05.05.0 12.5 Zamak linear mounting plate. Knock-in fi xing with dowels Ø10mm. Vertical adjustment. Height Material Code H=2 Zamak 52.0410.05.02.000 17.5 72 32 H 16.5 Ø10 18 Zamak linear mounting plate. Knock-in fi xing with dowels Ø8mm. Vertical adjustment. Height Material Code H=2 Zamak 52.0409.05.02.000 72 32 16.5 Ø8 18 H 17.5 Zamak linear mounting plate. Selftapping screw fi xing 3.5x15mm. Vertical adjustment. Screws are provided on demand (code 1A03050418000). 72 32 16.5 18 H 17.5 Height Material Code H=2 Zamak 52.0408.05.02.000 MOUNTING PLATES

49. 56 Series Optima Click Zamak linear mounting plate. Knock-in fi xing with dowels Ø10mm. Independent vertical adjustment with CAM. Height Material Code H=3 Zamak 52.0450.R5.03.0 H=5 Zamak 52.0450.R5.05.0 • • Mounting plate provided on demand for minimun quantity ordered Ø10 Zamak linear mounting plate. Knock-in fi xing with dowels Ø8mm. Independent vertical adjustment with CAM. Height Material Code H=3 Zamak 52.0449.R5.03.0 H=5 Zamak 52.0449.R5.05.0 • • Mounting plate provided on demand for minimun quantity ordered Ø8 Zamak linear mounting plate. Selftapping screw fi xing 3.5x15mm. Independent vertical adjustment with CAM. Screws are provided on demand (code 1A03050418000). Height Material Code H=3 Zamak 52.0448.R5.03.0 H=5 Zamak 52.0448.R5.05.0 • • Mounting plate provided on demand for minimun quantity ordered Metal cruciform mounting plate. Knock-in fi xing with dowels Ø10mm. Independent vertical adjustment with CAM. 56 79 32 H 28 Ø10 28 Height Material Code H=2 Steel 52.R466.L5.02.0 H=4 Steel 52.R466.L5.04.0 = G / Genios Integrated Solution R / Genios Retro fi t Solution Attention: the picture shows the real product, the 3D drawing shows drilling and mounting instruction.

83. 90 MS Slide-On 90° Ø26 for wood doors Technical speci fi cations: • Depth of the metal cup 11.7mm • Cup diameter 26mm • Opening 90° • Possibility of door drilling (K) from 3 to 5 mm • Thickness of the door (T) from 16 to 26 mm 51.MG15.05.15.0 51.MG16.05.15.M 51.MG16.05.15.* 51.MG15.05.08.0 51.MG16.05.08.M 51.MG16.05.08.* 51.MG15.05.00.0 51.MG16.05.00.M 51.MG16.05.00.* CRANK 0 CRANK 8 CRANK 15 Available with premounted selftapping screws * 0 = dowels Ø10mm / D = dowels Ø8mm 50 8 29 K 38 M CUP HOLE DISTANCE 38x8mm M M M The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107.

18. 25 Values given in mm HINGES p. 38 p. 38 p. 38 p. 40 p. 40 p. 40 Crank 0 Crank 8 Crank 15 GROOVED PROFILE LOCK FIXING p. 42 p. 42 p. 44 p. 44 p. 42 p. 42 p. 44 p. 44 Crank 0 Crank 8 Crank 15 Crank 22 66 7.5 43 K 52 S CUP HOLE DISTANCE 52x7.5mm ZIP FIXING SYSTEM The hinges with Zip fi xing system are available on demand. Please contact the FGV Customer Service. FOR DOORS WITH ALUMINIUM FRAME 105° FOR THICK DOORS OPENING 90° Ø40 SELFTAPPING SCREW DOWEL Insert by hand the hinge on the door. Push to fi x the hinge. The Zip dowels allow a no-tool mounting of the hinge. SPECIAL SOLUTIONS

39. 46 GENIOS R OPTIMA RETROFIT MOUNTING PLATE GENIOS G OPTIMA INTEGRATED MOUNTING PLATE Series Optima Click Height Material Code H=2 Steel 52.0401.M5.02.0 H=4 Steel 52.0401.M5.04.0 H=6 Steel 52.0401.M5.06.0 Metal cruciform mounting plate. Selftapping screw fi xing. Vertical adjustment. Screws are provided on demand. 37 Metal cruciform mounting plate. Selftapping screw fi xing. Vertical adjustment. Screws are provided on demand. 56 79 32 37 H Ø5 37 Height Material Code H=2 Steel 52.0401.M5.02.0 H=4 Steel 52.0401.M5.04.0 = G / Genios Integrated Solution R / Genios Retro fi t Solution Genios Optima damper for Genios Optima Retro fi t mounting plate. HOW TO CHOOSE YOUR MOUNTING PLATE OPTIMA STANDARD MOUNTING PLATE OPTIMA GENIOS DAMPER + Code 4H.0LAM.GU.X5.0CF Attention: the picture shows the real product, the 3D drawing shows drilling and mounting instruction.

44. 51 Values given in mm HINGES Metal cruciform mounting plate. Selftapping screw fi xing. Vertical adjustment. Screws are provided on demand. Height Material Code H=4 Steel 52.0422.M5.04.0 28 Metal cruciform mounting plate. Knock-in fi xing with dowels Ø10mm. Independent vertical adjustment with CAM. Height Material Code H=2 Steel 52.R446.L5.02.0 H=4 Steel 52.R446.L5.04.0 Ø10 37 Metal cruciform mounting plate. Knock-in fi xing with dowels Ø10mm. Independent vertical adjustment with CAM. 56 79 32 37 H Ø10 37 Height Material Code H=2 Steel 52.R446.L5.02.0 H=4 Steel 52.R446.L5.04.0 = G / Genios Integrated Solution R / Genios Retro fi t Solution Metal cruciform mounting plate. Selftapping screw fi xing. Vertical adjustment. Screws are provided on demand. 56 79 H 32 28 Ø5 28 Height Material Code H=2 Steel 52.0422.05.02.0 H=4 Steel 52.0422.05.04.0 = G / Genios Integrated Solution R / Genios Retro fi t Solution MOUNTING PLATES

106. 113 Values given in mm HINGES SPECIAL SOLUTIONS FOR CORNER CABINET - GLASS OPENING 90° p. 120 p. 120 p. 120 Angle 24°÷30° Angle 45° Angle 90° FOR GLASS DOORS OPENING 105° Ø26 p. 118 p. 118 p. 118 Crank 0 Crank 8 Crank 15 p. 122 p. 122 p. 122 FOR DOORS WITH ALUMINIUM FRAME OPENING 105° Crank 0 Crank 8 Crank 15 N N NYLON (glass) NYLON (glass) Ø26 5 Ø26 5 K K ZIP FIXING SYSTEM The hinges with Zip fi xing system are available on demand. Please contact the FGV Customer Service. Insert by hand the hinge on the door. Push to fi x the hinge. LOCK FIXING The Zip dowels allow a no-tool mounting of the hinge.

77. 84 MS Slide-On for corner cabinet Technical speci fi cations: • Depth of the metal cup 11.3mm • Cup diameter 35mm • Opening 110° with (K) max 4mm and (T) max 18mm • Possibility of door drilling (K) from 3 to 7 mm • Thickness of the door (T) from 16 to 26 mm I A D I A D I A D I A D 51.MS83.M5.35.0 51.MS83.M5.35.C 51.MS83.M5.35.B 51.MS84.M5.35.M 51.MS84.M5.35.N 51.MS84.M5.35.E 51.MS84.M5.35. * 51.MS84.M5.35.S 51.MS84.M5.35.B 51.MS88.M5.35.V 51.MS88.M5.35.U 51.MS88.M5.35.Z I D A Available with premounted selftapping screws The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107. * 0 = dowels Ø10mm / D = dowels Ø8mm

119. 126 Series QS Mini MOUNTING PLATES Attention: the picture shows the real product, the 3D drawing shows drilling and mounting instruction. Metal cruciform mounting plate. Knock-in fi xing with dowels Ø8mm. Vertical adjustment. .5 Ø8 * C = E = 10.8 7.5 Height Material Code H=2 Steel 52.03 * 1.M5.02.1 28 Metal cruciform mounting plate. Knock-in fi xing with dowels Ø10mm. Vertical adjustment. .5 Ø10 * D = F = 10.8 8.5 Height Material Code H=2 Steel 52.03 * 1.M5.02.1 28 .5 Ø5 Height Material Code H=2 Steel 52.03N1.M5.02.1 Metal mounting plate. Fixing by expanding X-Pando dowels Ø5mm. Vertical adjustment. 28 Euro screws with Pozi drive head, nickel for mounting plate fi xing. L Ø ØLength Material Code 6.3 10 Steel 1A075029350CF 6.3 12 Steel 1A075108250CF 6.3 14 Steel 1A075108150CF

105. 112 Cup hole distance 38x8mm 50 8 29 K 38 M FOR WOOD DOORS 105° Ø26 p. 114 p. 114 p. 114 p. 114 p. 114 p. 114 p. 114 p. 114 p. 114 p. 114 p. 114 p. 114 p. 114 p. 114 p. 114 Crank 0 Crank 8 Crank 15 FOR WOOD CORNER DOORS 90° p. 116 p. 116 p. 116 p. 116 p. 116 p. 116 p. 116 p. 116 p. 116 p. 116 p. 116 p. 116 p. 116 p. 116 p. 116 Angle 24°÷30° Angle 45° Angle 90° SELFTA PPING SCREW EURO SCREW DOWEL VELOFIX DOWEL X-PANDO DOWEL

12. 19 HINGES O p t i m a Optima C l i c k Click T h e r i g h t l o o k The right look Designed to last One-Step 3D adjustment Safe rapid fi xing Genios compatible Option OneTouch Complete system The Optima Click hinge represents the premium offering in the FGV hinge program with improved, elegant & timeless design and some unique functional features. An aesthetic and functionally convincing hinge, with a straight and modern look, emphasized by the possibility of customization with a logo. All the adjustments are immediate, allowing to fi nd the door’s correct position in one step. Optima hinges are available with the whole array of cup- fi xing solutions, including the no-tool Centra system. To keep the door movement under control and providing a silent closing Optima hinges are available in Genios con fi guration, and compatible with SlowMotion add-on damper solutions as well.

120. 127 Values given in mm HINGES FITTINGS Oval face plate for glass door hinge. Colour Code Bright chrome 51.0150.05.01D.00 Matt chrome 51.0150.0G.01D.00 Bright gold 51.0150.04.01D.00 Black painted 51.0150.08.01D.00 Black RAL 9005 51.0150.0T.01D.00 White RAL 9016 51.0150.01.01D.00 Metallized bright chrome 51.0150.0K.01D.00 Metallized bright gold 51.0150.0H.01D.00 Matt chrome painted 51.0150.0J.01D.00 Matt nickel 51.0150.06.01D.00 Round face plate for glass door hinge. Colour Code Bright chrome 51.0150.05.01R.00 Matt chrome 51.0150.0G.01R.00 Bright gold 51.0150.04.01R.00 Black painted 51.0150.08.01R.00 Black RAL 9005 51.0150.0T.01R.00 White RAL 9016 51.0150.01.01R.00 Metallized bright chrome 51.0150.0K.01R.00 Metallized bright gold 51.0150.0H.01R.00 Matt chrome painted 51.0150.0J.01R.00 Matt nickel 51.0150.06.01R.00 Selftapping screws with Pozi drive head, nickel for hinge and mounting plate fi xing. L Ø ØLength Material Code 412.5 Steel 1A035034150CF 415.5 Steel 1A035034250CF Euro screws with Pozi drive head, nickel for hinge fi xing. L Ø ØLength Material Code 6.3 12 Steel 1A075130050CF Dowel in nylon for hinge fi xing. H ØHeight Material Code 10 12 Nylon 2H011070530CF 811 Nylon 2H000449003CF

29. 36 Optima Click for corner cabinet Technical speci fi cations: • Depth of the metal cup 11.3mm • Cup diameter 35mm • Opening 110° with (K) max 4mm e (T) max 18mm • Possibility of door drilling (K) from 3 to 7 mm • Thickness of the door (T) from 16 to 26 mm I A D I A D I A D I A D I A D 51.XH83.05.35.0 51.XH83.05.35.C 51.XH83.05.35.B 51.XH84.05.35.M 51.XH84.05.35.N 51.XH84.05.35.E 51.XH84.05.35. * 51.XH84.05.35.S 51.XH84.05.35.B 51.XH88.05.35.V 51.XH88.05.35.U 51.XH88.05.35.Z 51.XH89.05.35.0 51.XH89.05.35.S 51.XH89.05.35.B I D A Available with premounted selftapping screws * 0 = dowels Ø10mm / D = dowels Ø8mm The mounting plates and fi ttings for this hinge series are shown from page 46 to page 59.

48. 55 Values given in mm HINGES Metal cruciform mounting plate. Knock-in fi xing with dowels Ø8mm. Independent vertical adjustment with CAM. Height Material Code H=2 Steel 52.R465.L5.02.0 H=4 Steel 52.R465.L5.04.0 Ø8 28 Metal cruciform mounting plate. Knock-in fi xing with dowels Ø8mm. Independent vertical adjustment with CAM. 56 79 32 H 28 Ø8 28 Height Material Code H=2 Steel 52.R465.L5.02.0 H=4 Steel 52.R465.L5.04.0 = G / Genios Integrated Solution R / Genios Retro fi t Solution Metal cruciform mounting plate. Fixing by expanding X-Pando dowels Ø5mm. Independent vertical adjustment with CAM. 56 79 32 H 28 Ø5 28 * 0 = 9.2 Height Material Code H=2 Steel 52.R4N1.L5.02. * H=4 Steel 52.R4N1.L5.04. * = G / Genios Integrated Solution R / Genios Retro fi t Solution Metal cruciform mounting plate. Knock-in fi xing with dowels Ø10mm. Independent vertical adjustment with CAM. Height Material Code H=2 Steel 52.R466.L5.02.0 H=4 Steel 52.R466.L5.04.0 Ø10 28 MOUNTING PLATES

14. 21 Summary table p. 22 Product detail p. 26 Summary table p. 22 Product detail p. 28 Summary table p. 22 Product detail p. 30 Summary table p. 22 Product detail p. 32 Summary table p. 22 Product detail p. 34 Summary table p. 22 Product detail p. 36 Summary table p. 25 Product detail p. 38 Summary table p. 25 Product detail p. 42 Summary table p. 25 INDEX OPENING 110° OPENING 125° OPENING 175° FOR THICK DOORS 95° Ø35 FOR CORNER DOORS 110° FOR CORNER CABINET 90° FOR DOORS WITH ALUMINIUM FRAME 105° FOR THICK DOORS 90° Ø40 ZIP FIXING SYSTEM SPECIAL SOLUTIONS HINGES

35. 42 Optima Click 90° Ø40 for thick doors Technical speci fi cations: • Depth of the metal cup 12.8mm • Cup diameter 40mm • Opening 90° • Possibility of door drilling (K) from 3 to 15 mm • Thickness of the door (T) from 16 to 40 mm • OneTouch solutions CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors CRANK 0 CRANK 8 51.XH45.05.00.0 51.XH46.05.00.0 51.XH45.05.08.0 51.XH46.05.08.0 CRANKS 15, 22 TO PAGE 44 >>> 66 7.5 43 K 52 S CUP HOLE DISTANCE 52x7.5mm S S / * 2 ; /$    / * 2 ; /$    The mounting plates and fi ttings for this hinge series are shown from page 46 to page 59.

93. 100 Series MS Slide-On Metal cruciform mounting plate. Euro screws premounted. Vertical adjustment. Ø5 37 = R / Genios Retro fi t Solution G / Genios Integrated Solution * C = 14 12 D = 10 H = Height Material Code H=0 Steel 52.C216.M5.00. * H=2 Steel 52.0216.M5.02. * H=4 Steel 52.0216.M5.04. * H=6 Steel 52.0216.M5.06. * H=10 Zamak 52.0216.05.10. * H=24 Zamak 52.0216.05.24. * Metal cruciform mounting plate. Selftapping screw fi xing. Vertical adjustment. Screws are provided on demand. 37 Height Material Code H=0 Steel 52.C201.M5.00.1 H=2 Steel 52.0201.M5.02.1 H=4 Steel 52.0201.M5.04.1 H=6 Steel 52.0201.M5.06.1 H=10 Zamak 52.0201.05.10.1 = R / Genios Retro fi t Solution G / Genios Integrated Solution Height Code H=2 59.050G.10.02.00000 H=4 59.050G.10.04.00000 H=6 59.050G.10.06.00000 GENIOS R SLIDE-ON RETROFIT MOUNTING PLATE GENIOS G SLIDE-ON INTEGRATED MOUNTING PLATE + Genios Slide-On damper for Genios Slide-On Retro fi t mounting plate. Attention: the picture shows the real product, the 3D drawing shows drilling and mounting instruction. HOW TO CHOOSE YOUR MOUNTING PLATE SLIDE-ON GENIOS DAMPER

109. 116 QS Mini 90° for wood corner doors Technical speci fi cations: • Depth of the metal cup 11.7mm • Cup diameter 26mm • Opening 90° • Possibility of door drilling (K) from 3 to 5 mm • Thickness of the door (T) from 12 to 26 mm 50 8 29 K 38 M M 51.QS15.05.24.00000 51.QS16.05.24.M0000 51.QS16.05.24. * 2000 51.QS18.05.24.V0000 51.QS19.05.24. * 0052 51.QS15.05.45.00000 51.QS16.05.45.M0000 51.QS16.05.45. * 2000 51.QS18.05.45.V0000 51.QS19.05.45. * 0052 51.QS15.M5.90.02000 51.QS16.M5.90.M2000 51.QS16.M5.90.*2000 51.QS18.M5.90.V2000 51.QS19.M5.90.*2052 Available with premounted selftapping screws * 0 = dowels Ø10mm / D = dowels Ø8mm * 0 = dowels Ø10mm / D = dowels Ø8mm M M M M ANGLE 24°÷30° ANGLE 45° ANGLE 90° The mounting plates and fi ttings for this hinge series are shown from page 124 to page 127.

54. 61 HINGES Cost-effective Slide-On mechanism Wide range 3D door adjustment Large program of cup- fi xing methods Genios Compatible Option OneTouch Complete range of solutions M S MS S l i d e - O n Slide-On T h e r i g h t f u n c t i o n The right function The MS Slide-On hinges represent the perfect synthesis between functional needs and right value of the product. The complete range allows to cover all the applications with a speci fi c solution, adjustable to the needs of the user through easy and strong adjustments. The rapid (Velo fi x and X-Pando) or no-tool (Zip) door fi xings allow assembly in a short time and in a safe way. The MS Slide-On hinges are available in push-open version for use with the OneTouch device for handleless cabinet design. They are available in Genios con fi guration, and compatible with SlowMotion Alfa and SlowMotion Delta add-on damper solutions as well.

63. 70 51.MS15.05.15.0 51.MS15.05.15.C 51.MS15.05.15.B 51.MS16.05.15.M 51.MS16.05.15.N 51.MS16.05.15.E 51.MS16.05.15. * 51.MS16.05.15.S 51.MS16.05.15.B 51.MS18.05.15.V 51.MS18.05.15.U 51.MS18.05.15.Z 51.MS19.05.15.0 51.MS19.05.15.S 51.MS19.05.15.B MS Slide-On 110° I A D I A D 51.MS15.05.08.0 51.MS15.05.08.C 51.MS15.05.08.B 51.MS16.05.08.M 51.MS16.05.08.N 51.MS16.05.08.E 51.MS16.05.08. * 51.MS16.05.08.S 51.MS16.05.08.B 51.MS18.05.08.V 51.MS18.05.08.U 51.MS18.05.08.Z 51.MS19.05.08.0 51.MS19.05.08.S 51.MS19.05.08.B CRANK 8 CRANK 15 I A D I D A The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107. I A D <<< CRANK 0, 4 TO PAGE 68 Available with premounted selftapping screws * 0 = dowels Ø10mm / D = dowels Ø8mm I A D = G / Genios Solution

65. 72 51.MK15.M5.00.0 51.MK15.M5.00.C 51.MK15.M5.00.B 51.MK16.M5.00.M 51.MK16.M5.00.N 51.MK16.M5.00.E 51.MK16.M5.00. * 51.MK16.M5.00.S 51.MK16.M5.00.B 51.MK18.M5.00.V 51.MK18.M5.00.U 51.MK18.M5.00.Z 51.MK15.M5.08.0 51.MK15.M5.08.C 51.MK15.M5.08.B 51.MK16.M5.08.M 51.MK16.M5.08.N 51.MK16.M5.08.E 51.MK16.M5.08. * 51.MK16.M5.08.S 51.MK16.M5.08.B 51.MK18.M5.08.V 51.MK18.M5.08.U 51.MK18.M5.08.Z MS Slide-On 125° Technical speci fi cations: • Depth of the metal cup 12.3mm • Cup diameter 35mm • Opening 125° with (K) max 4mm e (T) max 18mm • Possibility of door drilling (K) from 3 to 5 mm • Thickness of the door (T) from 16 to 26 mm I A D CRANK 8 CRANK 0 I A D I A D I A D I D A Available with premounted selftapping screws The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107. * 0 = dowels Ø10mm / D = dowels Ø8mm

67. 74 MS Slide-On 175° I A D CRANK 0 CRANK 8 I A D I A D I A D 51.MW15.S5.00.0 51.MW15.S5.00.C 51.MW15.S5.00.B 51.MW16.S5.00.M 51.MW16.S5.00.N 51.MW16.S5.00.E 51.MW16.S5.00. * 51.MW16.S5.00.S 51.MW16.S5.00.B 51.MW18.S5.00.V 51.MW18.S5.00.U 51.MW18.S5.00.Z 51.MW15.M5.08.0 51.MW15.M5.08.C 51.MW15.M5.08.B 51.MW16.M5.08.M 51.MW16.M5.08.N 51.MW16.M5.08.E 51.MW16.M5.08. * 51.MW16.M5.08.S 51.MW16.M5.08.B 51.MW18.M5.08.V 51.MW18.M5.08.U 51.MW18.M5.08.Z I D A Technical speci fi cations: • Depth of the metal cup 11.3mm • Cup diameter 35mm • Opening 175° • Possibility of door drilling (K) from 3 to 7 mm • Thickness of the door (T) from 16 to 26 mm • SlowMotion Delta solutions Available with premounted selftapping screws The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107. * 0 = dowels Ø10mm / D = dowels Ø8mm

107. 114 QS Mini 105° Ø26 for wood doors Technical speci fi cations: • Depth of the metal cup 9.8mm • Cup diameter 26mm • Opening 105° with (K) max 4mm and (T) max 18mm • Possibility of door drilling (K) from 3 to 6 mm • Thickness of the door (T) from 12 to 26 mm 50 8 29 K 38 M M 51.QS15.05.00.02000 51.QS16.05.00.M2000 51.QS16.05.00. * 2000 51.QS18.05.00.V2000 51.QS19.05.00. * 2052 51.QS15.05.08.0200 51.QS16.05.08.M2000 51.QS16.05.08. * 2000 51.QS18.05.08.V2000 51.QS19.05.08. * 2052 51.QS15.05.15.02000 51.QS16.05.15.M2000 51.QS16.05.15. * 2000 51.QS18.05.15.V2000 51.QS19.05.15. * 2052 CRANK 0 CRANK 8 CRANK 15 Available with premounted selftapping screws * 0 = dowels Ø10mm / D = dowels Ø8mm * 0 = dowels Ø10mm / D = dowels Ø8mm M M M M The mounting plates and fi ttings for this hinge series are shown from page 124 to page 127.

43. 50 Series Optima Click Metal cruciform mounting plate. Knock-in fi xing with dowels Ø8mm. Independent vertical adjustment with CAM. 56 79 32 37 H Ø8 37 Height Material Code H=2 Steel 52.R445.L5.02.0 H=4 Steel 52.R445.L5.04.0 = G / Genios Integrated Solution R / Genios Retro fi t Solution Metal cruciform mounting plate. Knock-in fi xing with dowels Ø8mm. Independent vertical adjustment with CAM. Height Material Code H=2 Steel 52.R445.L5.02.0 H=4 Steel 52.R445.L5.04.0 Ø8 37 Metal cruciform mounting plate. Fixing by expanding X-Pando dowels Ø5mm. Independent vertical adjustment with CAM. 56 79 32 37 Ø5 H 37 * 0 = 9.2 Height Material Code H=2 Steel 52.R4N5.L5.02. * H=4 Steel 52.R4N5.L5.04. * = G / Genios Integrated Solution R / Genios Retro fi t Solution Metal cruciform mounting plate. Fixing by expanding X-Pando dowels Ø5mm. Independent vertical adjustment with CAM. * 0 = 9.2 Height Material Code H=2 Steel 52.R4N5.L5.02. * H=4 Steel 52.R4N5.L5.04. * Ø5 37 Attention: the picture shows the real product, the 3D drawing shows drilling and mounting instruction.

117. Series QS Mini Attention: the picture shows the real product, the 3D drawing shows drilling and mounting instruction. Metal cruciform mounting plate. Selftapping screw fi xing. Vertical adjustment. Screws are provided on demand. .5 Height Material Code H=0 Steel 52.0301.M5.00.1 H=2 Steel 52.0301.M5.02.1 H=4 Steel 52.0301.M5.04.1 H=6 Steel 52.0301.M5.06.1 37 Metal cruciform mounting plate. Euro screws premounted. Vertical adjustment. .5 Ø5 * C = 14 12 10 D =H = Height Material Code H=0 Steel 52.0316.M5.00. * H=2 Steel 52.0316.M5.02. * H=4 Steel 52.0316.M5.04. * H=6 Steel 52.0316.M5.06. * 37 Metal cruciform mounting plate. Fixing by expanding X-Pando dowels Ø5mm. Vertical adjustment. Height Material Code H=0 Steel 52.03N5.M5.00. * H=2 Steel 52.03N5.M5.02. * H=4 Steel 52.03N5.M5.04. * H=6 Steel 52.03N5.M5.06. * * 1 = 3 = 9.2 7.5 .5 Ø5 37 Metal cruciform mounting plate. Premounted selftapping screws Ø4.7mm. Vertical adjustment. Height Material Code H=0 Steel 52.03G5.M5.00.1 H=2 Steel 52.03G5.M5.02.1 H=4 Steel 52.03G5.M5.04.1 H=6 Steel 52.03G5.M5.06.1 .5 Ø3 37 124

73. 80 51.MK85.M5.25.0 51.MK85.M5.25.C 51.MK85.M5.25.B 51.MK86.M5.25.M 51.MK86.M5.25.N 51.MK86.M5.25.E 51.MK86.M5.25. * 51.MK86.M5.25.S 51.MK86.M5.25.B 51.MK88.M5.25.V 51.MK88.M5.25.U 51.MK88.M5.25.Z 51.MS85.05.25.0 51.MS85.05.25.C 51.MS85.05.25.B 51.MS86.05.25.M 51.MS86.05.25.N 51.MS86.05.25.E 51.MS86.05.25. * 51.MS86.05.25.S 51.MS86.05.25.B 51.MS88.05.25.V 51.MS88.05.25.U 51.MS88.05.25.Z MS Slide-On 110° for corner doors Technical speci fi cations: • Depth of the metal cup 11.3mm • Cup diameter 35mm • Opening 110° • Possibility of door drilling (K) from 3 to 7 mm • Thickness of the door (T) from 16 to 26 mm • OneTouch solutions I A D ANGLE -25° ANGOLO +25° I A D I A D I A D I D A Available with premounted selftapping screws The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107. * 0 = dowels Ø10mm / D = dowels Ø8mm ANGLES 24°÷30°, 45°, 90° TO PAGE 82 >>>

42. 49 Values given in mm HINGES Metal cruciform mounting plate. Selftapping screw fi xing. Independent vertical adjustment with CAM. Screws are provided on demand. Height Material Code H=2 Steel 52.R444.L5.02.0 H=4 Steel 52.R444.L5.04.0 37 Ø5 Metal cruciform mounting plate. Euro screws premounted. Independent vertical adjustment with CAM. * A= 14 12 10 B=G= Height Material Code H=2 Steel 52.R447.L5.02. * H=4 Steel 52.R447.L5.04. * 37 56 79 32 37 H Metal cruciform mounting plate. Selftapping screw fi xing. Independent vertical adjustment with CAM. Screws are provided on demand. 37 Height Material Code H=2 Steel 52.R444.L5.02.0 H=4 Steel 52.R444.L5.04.0 = G / Genios Integrated Solution R / Genios Retro fi t Solution 56 79 32 37 H Ø5 Metal cruciform mounting plate. Euro screws premounted. Independent vertical adjustment with CAM. 37 * A = 14 12 10 B =G = Height Material Code H=2 Steel 52.R447.L5.02. * H=4 Steel 52.R447.L5.04. * = G / Genios Integrated Solution R / Genios Retro fi t Solution MOUNTING PLATES

23. 30 Optima Click 175° I A D I A D CRANK 0 CRANK 8 I A D I A D I A D 51.XWH5.M5.00.0 51.XWH5.M5.00.C 51.XWH5.M5.00.B 51.XWH6.M5.00.M 51.XWH6.M5.00.N 51.XWH6.M5.00.E 51.XWH6.M5.00. * 51.XWH6.M5.00.S 51.XWH6.M5.00.B 51.XWH8.M5.00.V 51.XWH8.M5.00.U 51.XWH8.M5.00.Z 51.XWH9.M5.00.0 51.XWH9.M5.00.S 51.XWH9.M5.00.B 51.XWH5.M5.08.0 51.XWH5.M5.08.C 51.XWH5.M5.08.B 51.XWH6.M5.08.M 51.XWH6.M5.08.N 51.XWH6.M5.08.E 51.XWH6.M5.08. * 51.XWH6.M5.08.S 51.XWH6.M5.08.B 51.XWH8.M5.08.V 51.XWH8.M5.08.U 51.XWH8.M5.08.Z 51.XWH9.M5.08.0 51.XWH9.M5.08.S 51.XWH9.M5.08.B I D A Technical speci fi cations: • Depth of the metal cup 11.3mm • Cup diameter 35mm • Opening 175° • Possibility of door drilling (K) from 3 to 7 mm • Thickness of the door (T) from 16 to 26 mm • SlowMotion Delta add-on damper solutions Available with premounted selftapping screws * 0 = dowels Ø10mm / D = dowels Ø8mm The mounting plates and fi ttings for this hinge series are shown from page 46 to page 59.

56. 63 HINGES INDEX OPENING 110° Summary table p. 64 Product detail p. 68 OPENING 125° Summary table p. 64 Product detail p. 72 OPENING 125° Summary table p. 64 Product detail p. 74 FOR THICK DOORS 95° Ø35 Summary table p. 64 Product detail p. 76 FOR CORNER DOORS 110° Summary table p. 64 Product detail p. 80 FOR CORNER CABINET Summary table p. 64 Product detail p. 84 FOR THICK DOORS 90° Ø40 Summary table p. 67 Product detail p. 86 FOR WOOD AND/OR GLASS DOORS 90° Ø26 Summary table p. 67 Product detail p. 90 FOR DOORS WITH ALUMINIUM FRAME 105° FLAP DOORS Summary table p. 67 Product detail p. 94 Summary table p. 67 Product detail p. 98 SPECIAL SOLUTIONS ZIP FIXING SYSTEM Summary table p. 67

40. 47 Values given in mm HINGES Metal cruciform mounting plate. Euro screws premounted. Vertical adjustment. * A = 14 12 10 B =G = Height Material Code H=2 Steel 52.0416.M5.02. * H=4 Steel 52.0416.M5.04. * H=6 Steel 52.0416.M5.06. * H=10 Zama 52.0416.05.10. * Ø5 37 Height Material Code H=2 Steel 52.04G5.M5.02.0 H=4 Steel 52.04G5.M5.04.0 H=6 Steel 52.04G5.M5.06.0 Metal cruciform mounting plate. Premounted selftapping screws Ø4.7mm. Vertical adjustment. Ø3 37 Metal cruciform mounting plate. Euro screws premounted. Vertical adjustment. 56 79 32 37 H Ø5 37 * A = 14 12 B = 10 G = Height Material Code H=2 Steel 52.0416.M5.02. * H=4 Steel 52.0416.M5.04. * = G / Genios Integrated Solution R / Genios Retro fi t Solution Metal cruciform mounting plate. Fixing by expanding X-Pando dowels Ø5mm. Vertical adjustment. Height Material Code H=2 Steel 52.04N5.M5.02. * H=4 Steel 52.04N5.M5.04. * H=6 Steel 52.04N5.M5.06. * * 0 = 2 = 9.2 7.5 Ø5 37 MOUNTING PLATES

71. 78 CRANK 8 CRANK 15 51.MT15.05.08.0 51.MT15.05.08.C 51.MT15.05.08.B 51.MT16.05.08.M 51.MT16.05.08.N 51.MT16.05.08.E 51.MT16.05.08. * 51.MT16.05.08.S 51.MT16.05.08.B 51.MT18.05.08.V 51.MT18.05.08.U 51.MT18.05.08.Z 51.MT15.05.15.0 51.MT15.05.15.C 51.MT15.05.15.B 51.MT16.05.15.M 51.MT16.05.15.N 51.MT16.05.15.E 51.MT16.05.15. * 51.MT16.05.15.S 51.MT16.05.15.B 51.MT18.05.15.V 51.MT18.05.15.U 51.MT18.05.15.Z 51.MZ15.05.15.0 51.MZ15.05.15.C 51.MZ15.05.15.B 51.MZ16.05.15.M 51.MZ16.05.15.N 51.MZ16.05.15.E 51.MZ16.05.15.0 51.MZ16.05.15.S 51.MZ16.05.15.B 51.MZ18.05.15.V 51.MZ18.05.15.U 51.MZ18.05.15.Z Available with premounted selftapping screws * 0 = dowels Ø10mm / D = dowels Ø8mm MS Slide-On 95° Ø35 for thick doors I D A The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107. = G / Genios Solution I A D I A D I A D I A D <<<CRANKS 0, 4 TO PAGE 76 51.MZ15.05.08.0 51.MZ15.05.08.C 51.MZ15.05.08.B 51.MZ16.05.08.M 51.MZ16.05.08.N 51.MZ16.05.08.E 51.MZ16.05.08.0 51.MZ16.05.08.S 51.MZ16.05.08.B 51.MZ18.05.08.V 51.MZ18.05.08.U 51.MZ18.05.08.Z

118. MOUNTING PLATES .5 Ø3 Metal cruciform mounting plate. Premounted selftapping screws Ø4.7mm. Vertical adjustment. Height Material Code H=2 Steel 52.03G1.M5.02.1 28 Metal cruciform mounting plate. Knock-in fi xing with dowels Ø10mm. Vertical adjustment. Height Material Code H=0 Steel 52.03 * 5.M5.00.1 H=2 Steel 52.03 * 5.M5.02.1 H=4 Steel 52.03 * 5.M5.04.1 H=6 Steel 52.03 * 5.M5.06.1 * D = F = 10.8 8.5 .5 Ø10 37 Metal cruciform mounting plate. Knock-in fi xing with dowels Ø8mm. Vertical adjustment. Height Material Code H=0 Steel 52.03 * 5.M5.00.1 H=2 Steel 52.03 * 5.M5.02.1 H=4 Steel 52.03 * 5.M5.04.1 H=6 Steel 52.03 * 5.M5.06.1 * C = E = 10.8 7.5 .5 Ø8 37 Metal cruciform mounting plate. Euro screws premounted. Vertical adjustment. .5 Ø5 Height Material Code H=2 Steel 52.0321.M5.02. * * C = 14 12 10 D =H = 28 125 Values given in mm HINGES

47. 54 Series Optima Click Metal cruciform mounting plate. Fixing by expanding X-Pando dowels Ø5mm. Independent vertical adjustment with CAM. * 0 = 9.2 Height Material Code H=2 Steel 52.R4N1.L5.02. * H=4 Steel 52.R4N1.L5.04. * Ø5 28 56 79 32 H 28 Ø5 Metal cruciform mounting plate. Euro screws premounted. Independent vertical adjustment with CAM. 28 * A = 14 12 10 B =G = Height Material Code H=2 Steel 52.R467.L5.02. * H=4 Steel 52.R467.L5.04. * = G / Genios Integrated Solution R / Genios Retro fi t Solution Metal cruciform mounting plate. Euro screws premounted. Independent vertical adjustment with CAM. Ø5 * A = 14 12 10 B =G = Height Material Code H=2 Steel 52.R467.L5.02. * H=4 Steel 52.R467.L5.04. * 28 56 79 32 H 28 Metal cruciform mounting plate. Selftapping screw fi xing. Independent vertical adjustment with CAM. Screws are provided on demand. 28 Height Material Code H=2 Steel 52.R464.L5.02.0 H=4 Steel 52.R464.L5.04.0 = G / Genios Integrated Solution R / Genios Retro fi t Solution Attention: the picture shows the real product, the 3D drawing shows drilling and mounting instruction.

45. 52 Series Optima Click Ø5 Metal cruciform mounting plate. Fixing by expanding X-Pando dowels Ø5mm. Vertical adjustment. 28 Height Material Code H=4 Steel 52.04N1.M5.04. * * 0 = 2= 9.2 7.5 56 79 32 H 28 Ø5 Metal cruciform mounting plate. Fixing by expanding X-Pando dowels Ø5mm. Vertical adjustment. 28 Height Material Code H=2 Steel 52.04N1.05.02. * H=4 Steel 52.04N1.05.04. * * 0 = 9.2 = G / Genios Integrated Solution R / Genios Retro fi t Solution Metal cruciform mounting plate. Euro screws premounted. Vertical adjustment. 56 79 32 H 28 Ø5 28 Height Material Code H=2 Steel 52.0421.05.02. * H=4 Steel 52.0421.05.04. * * A = 14 12 10 B =G = = G / Genios Integrated Solution R / Genios Retro fi t Solution Metal cruciform mounting plate. Euro screws premounted. Vertical adjustment. Ø5 28 Height Material Code H=4 Steel 52.0421.M5.04. * * A = 14 12 10 B =G = Attention: the picture shows the real product, the 3D drawing shows drilling and mounting instruction.

25. 32 Optima Click 95° Ø35 for thick doors Technical speci fi cations: • Depth of the metal cup 12.3mm • Cup diameter 35mm • Opening 95° • Possibility of door drilling (K) from 3 to 7 mm • Thickness of the door (T) from 16 to 30 mm • Available only Genios solutions I A D I A D 51.XZH5.05.00.0 51.XZH5.05.00.C 51.XZH5.05.00.B 51.XZH6.05.00.M 51.XZH6.05.00.N 51.XZH6.05.00.E 51.XZH6.05.00. * 51.XZH6.05.00.S 51.XZH6.05.00.B 51.XZH8.05.00.V 51.XZH8.05.00.U 51.XZH8.05.00.Z 51.XZH5.05.08.0 51.XZH5.05.08.C 51.XZH5.05.08.B 51.XZH6.05.08.M 51.XZH6.05.08.N 51.XZH6.05.08.E 51.XZH6.05.08. * 51.XZH6.05.08.S 51.XZH6.05.08.B 51.XZH8.05.08.V 51.XZH8.05.08.U 51.XZH8.05.08.Z 51.XZH5.05.15.0 51.XZH5.05.15.C 51.XZH5.05.15.B 51.XZH6.05.15.M 51.XZH6.05.15.N 51.XZH6.05.15.E 51.XZH6.05.15. * 51.XZH6.05.15.S 51.XZH6.05.15.B 51.XZH8.05.15.V 51.XZH8.05.15.U 51.XZH8.05.15.Z I A D I D A I A D Available with premounted selftapping screws * 0 = dowels Ø10mm / D = dowels Ø8mm CRANK 0 CRANK 8 CRANK 15 = G / Genios Solution The mounting plates and fi ttings for this hinge series are shown from page 46 to page 59.

61. 68 51.MS15.05.04.0 51.MS15.05.04.C 51.MS15.05.04.B 51.MS16.05.04.M 51.MS16.05.04.N 51.MS16.05.04.E 51.MS16.05.04. * 51.MS16.05.04.S 51.MS16.05.04.B 51.MS18.05.04.V 51.MS18.05.04.U 51.MS18.05.04.Z 51.MS19.05.04.0 51.MS19.05.04.S 51.MS19.05.04.B MS Slide-On 110° Technical speci fi cations: • Depth of the metal cup 11.3mm • Cup diameter 35mm • Opening 110° with (K) max 4mm e (T) max 18mm • Possibility of door drilling (K) from 3 to 7 mm • Thickness of the door (T) from 16 to 26 mm • Genios, SlowMotion Alfa and OneTouch solutions I A D 51.MS15.05.00.0 51.MS15.05.00.C 51.MS15.05.00.B 51.MS16.05.00.M 51.MS16.05.00.N 51.MS16.05.00.E 51.MS16.05.00. * 51.MS16.05.00.S 51.MS16.05.00.B 51.MS18.05.00.V 51.MS18.05.00.U 51.MS18.05.00.Z 51.MS19.05.00.0 51.MS19.05.00.S 51.MS19.05.00.B CRANK 0 CRANK 4 I A D I A D I A D I D A The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107. I A D CRANKS 8, 15 TO PAGE 70 >>> Available with premounted selftapping screws * 0 = dowels Ø10mm / D = dowels Ø8mm = G / Genios Solution

41. 48 Series Optima Click Asymmetric mounting plate for central panel. Fixing by dowels and premounted selftapping screws. Vertical adjustment. Height Material Code H=2 Steel 52.54N7.M5.02.0 H=4 Steel 52.54N7.M5.04.0 Ø5 37 Metal cruciform mounting plate. Knock-in fi xing with dowels Ø10mm. Vertical adjustment. Height Material Code H=2 Steel 52.04 * 5.M5.02.0 H=4 Steel 52.04 * 5.M5.04.0 H=6 Steel 52.04 * 5.M5.06.0 * D = F = 10.8 8.5 Ø10 37 Attention: the picture shows the real product, the 3D drawing shows drilling and mounting instruction. Metal cruciform mounting plate. Knock-in fi xing with dowels Ø8mm. Vertical adjustment. Height Material Code H=2 Steel 52.04 * 5.M5.02.0 H=4 Steel 52.04 * 5.M5.04.0 H=6 Steel 52.04 * 5.M5.06.0 * C = E = 10.8 7.5 Ø8 37 Metal cruciform mounting plate. Fixing by expanding X-Pando dowels Ø5mm. Vertical adjustment. 56 79 32 37 Ø5 H 37 Height Material Code H=2 Steel 52.04N5.M5.02. * H=4 Steel 52.04N5.M5.04. * * 0 = 9.2 = G / Genios Integrated Solution R / Genios Retro fi t Solution

64. 71 Values given in mm HINGES Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. 110° 110° CRANK 8 For partial lay-on doors 3 4 5 6 7 11 0 2 10 0 2 9 0 2 4 8 2 4 7 2 4 6 6 4 6 5 4 6 4 6 3 6 Drilling distance (K) Overlay (C) Mounting plates (H) CRANK 15 For inset doors 3 4 5 6 7 0 2 4 6 1 4 6 2 4 6 3 6 4 6 Drilling distance (K) Overlay (C) Mounting plates (H) T= 16 17 18 19 20 21 22 23 24 25 26 A= 0.55 0.75 1.10 1.45 1.80 2.40 3.10 3.90 4.70 6.70 6.50 A= 0.55 0.70 1.05 1.40 1.75 2.25 2.85 3.60 4.35 5.75 6.00 A= 0.55 0.70 1.00 1.35 1.65 2.10 2.65 3.30 4.00 4.75 5.55 A= 0.50 0.70 0.95 1.25 1.60 2.00 2.50 3.05 3.70 4.40 5.20 A= 0.50 0.65 0.85 1.20 1.55 1.90 2.35 2.85 3.45 4.10 4.80 K=3 K=4 K=5 K=6 K=7

21. 28 51.XKH5.M5.00.0 51.XKH5.M5.00.C 51.XKH5.M5.00.B 51.XKH6.M5.00.M 51.XKH6.M5.00.N 51.XKH6.M5.00.E 51.XKH6.M5.00. * 51.XKH6.M5.00.S 51.XKH6.M5.00.B 51.XKH8.M5.00.V 51.XKH8.M5.00.U 51.XKH8.M5.00.Z 51.XKH9.M5.00.0 51.XKH9.M5.00.S 51.XKH9.M5.00.B 51.XKHC.05.00.0 51.XKHC.05.00.0 51.XKH5.M5.08.0 51.XKH5.M5.08.C 51.XKH5.M5.08.B 51.XKH6.M5.08.M 51.XKH6.M5.08.N 51.XKH6.M5.08.E 51.XKH6.M5.08. * 51.XKH6.M5.08.S 51.XKH6.M5.08.B 51.XKH8.M5.08.V 51.XKH8.M5.08.U 51.XKH8.M5.08.Z 51.XKH9.M5.08.0 51.XKH9.M5.08.S 51.XKH9.M5.08.B 51.XKHC.05.08.0 51.XKHC.05.08.0 Optima Click 125° Technical speci fi cations: • Depth of the metal cup 11.3mm • Cup diameter 35mm • Opening 125° with (K) max 4mm and (T) max 18mm • Possibility of door drilling (K) from 3 to 5 mm • Thickness of the door (T) from 16 a 26 mm • OneTouch solutions I A D I A D I A CRANK 8 CRANK 0 I A D I A D I A D I D A Available with premounted selftapping screws The mounting plates and fi ttings for this hinge series are shown from page 46 to page 59. * 0 = dowels Ø10mm / D = dowels Ø8mm

28. 35 Values given in mm HINGES T= 16 17 18 19 20 21 22 23 24 25 26 A= 0.55 0.75 1.10 1.45 1.80 2.40 3.10 3.90 4.70 6.70 6.50 A= 0.55 0.70 1.05 1.40 1.75 2.25 2.85 3.60 4.35 5.75 6.00 A= 0.53 0.70 1.00 1.35 1.65 2.10 2.65 3.30 4.00 4.75 5.55 A= 0.50 0.70 0.95 1.25 1.60 2.00 2.50 3.05 3.70 4.40 5.20 A= 0.50 0.65 0.85 1.20 1.55 1.90 2.35 2.85 3.45 4.10 4.80 K=3 K=4 K=5 K=6 K=7 ANGLE 24°÷30° ANGLE 45° ANGLE 90° Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. 110° 110° ‡      $ 2 /$      ;   ‡    $ 2 /$    ;  /$ ; /$   ‡  $ 2 /$ ‡     ;    ‡  $ 2 /$   ;

66. 73 Values given in mm HINGES T= 16 17 18 19 20 21 22 23 24 25 26 A= 0.90 1.40 1.90 2.40 3.00 3.60 4.25 4.90 5.55 6.20 6.80 A= 0.85 1.25 1.75 2.25 2.75 3.35 4.00 4.65 5.30 5.95 6.60 A= 0.80 1.10 1.60 2.10 2.55 3.15 3.75 4.45 5.05 5.70 6.35 K=3 K=4 K=5 3 4 5 6 7 19 0 2 18 0 2 17 0 2 4 16 2 4 15 2 4 6 14 4 6 13 4 6 12 6 11 6 Drilling distance (K) Overlay (C) Mounting plates (H) CRANK 0 For lay-on doors 3 4 5 6 7 11 0 2 10 0 2 9 0 2 4 8 2 4 7 2 4 6 6 4 6 5 4 6 4 6 3 6 Drilling distance (K) Overlay (C) Mounting plates (H) CRANK 8 For partial lay-on doors Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. 125° 125°

68. 75 Values given in mm HINGES T= 16 17 18 19 20 21 22 23 24 25 26 A= 0.00 0.00 0.00 0.00 0.00 0.00 0.20 0.55 6.80 8.10 13.55 A= 0.00 0.00 0.00 0.00 0.00 0.05 0.30 3.50 5.85 7.25 12.55 A= 0.00 0.00 0.00 0.00 0.00 0.05 0.30 3.55 4.90 6.25 11.55 A= 0.00 0.00 0.00 0.00 0.00 0.05 0.40 3.00 3.90 5.25 10.55 A= 0.00 0.00 0.00 0.00 0.00 0.05 1.20 2.20 3.15 4.25 9.55 K=3 K=4 K=5 K=6 K=7 3 4 5 6 7 19 0 2 18 0 2 17 0 2 4 16 2 4 15 2 4 6 14 4 6 13 4 6 12 6 11 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 7 11 0 2 10 0 2 9 0 2 4 8 2 4 7 2 4 6 6 4 6 5 4 6 4 6 3 6 Drilling distance (K) Overlay (C) Mounting plates (H) CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. 175° 175°

60. 67 Values given in mm HINGES SPECIAL SOLUTIONS FOR FLAP DOORS p. 86 p. 86 p. 88 p. 88 p. 86 p. 86 p. 88 p. 88 Crank 0 Crank 8 Crank 15 Crank 22 FOR THICK DOORS OPENING 90° Ø40 66 7.5 43 K 52 S CUP HOLE DISTANCE 52x7.5mm 50 8 29 K 38 M CUP HOLE DISTANCE 38x8mm K N SELFTAPPING SCREW DOWEL FOR DOORS WITH ALUMINIUM FRAME OPENING 105° p. 94 p. 94 p. 94 p. 98 p. 96 p. 96 p. 96 p. 98 Crank 0 Crank 8 Crank 15 GROOVED PROFILE LEFT LOCK FIXING RIGHT NYLON (glass) FOR WOOD AND/OR GLASS DOORS 90° Ø26 p. 90 p. 90 p. 90 p. 90 p. 90 p. 90 p. 90 p. 90 p. 90 p. 92 p. 92 p. 92 Crank 0 Crank 8 Crank 15 SELFTAPPING SCREW EURO SCREW DOWEL ZIP FIXING SYSTEM The hinges with Zip fi xing system are available on demand. Please contact the FGV Customer Service. Insert by hand the hinge on the door. Push to fi x the hinge. The Zip dowels allow a no-tool mounting of the hinge. Ø35 Ø35 Ø26 5

62. 69 Values given in mm HINGES T= 16 17 18 19 20 21 22 23 24 25 26 A= 0.55 0.75 1.10 1.45 1.80 2.40 3.10 3.90 4.70 6.70 6.50 A= 0.55 0.70 1.05 1.40 1.75 2.25 2.85 3.60 4.35 5.75 6.00 A= 0.55 0.70 1.00 1.35 1.65 2.10 2.65 3.30 4.00 4.75 5.55 A= 0.50 0.70 0.95 1.25 1.60 2.00 2.50 3.05 3.70 4.40 5.20 A= 0.50 0.65 0.85 1.20 1.55 1.90 2.35 2.85 3.45 4.10 4.80 K=3 K=4 K=5 K=6 K=7 Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. 110° 110° CRANK 0 For lay-on doors 3 4 5 6 7 19 0 2 18 0 2 17 0 2 4 16 2 4 15 2 4 6 14 4 6 13 4 6 12 6 11 6 Drilling distance (K) Overlay (C) Mounting plates (H) CRANK 4 For partial lay-on doors 3 4 5 6 7 15 0 2 14 0 2 13 0 2 4 12 2 4 11 2 4 6 10 4 6 9 4 6 8 6 7 6 Drilling distance (K) Overlay (C) Mounting plates (H)

72. 79 Values given in mm HINGES CRANK 8 For partial lay-on doors CRANK 15 For inset doors 95° 95° 3 4 5 6 7 0 2 4 6 1 4 6 2 4 6 3 6 4 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 7 11 0 2 10 0 2 9 0 2 4 8 2 4 7 2 4 6 6 4 6 5 4 6 4 6 3 6 Drilling distance (K) Overlay (C) Mounting plates (H) T= 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 A= 0.00 0.15 0.35 0.5 0.7 0.85 1.15 1.65 2.55 3.40 4.30 5.20 6.15 7.10 8.00 A= 0.00 0.15 0.30 0.50 0.65 0.85 1.10 1.40 2.10 2.90 3.80 4.65 5.50 6.45 7.40 A= 0.00 0.15 0.30 0.50 0.65 0.80 1.00 1.35 1.75 2.50 3.30 4.15 5.00 5.90 6.75 A= 0.00 0.10 0.30 0.45 0.65 0.80 1.00 1.30 1.65 2.15 2.90 3.65 4.50 5.40 6.05 A= 0.00 0.10 0.30 0.45 0.60 0.80 0.95 1.25 1.60 1.90 2.55 3.30 4.05 4.90 5.75 K=3 K=4 K=5 K=6 K=7 Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. 14.5 C H T K H=2 H=4 H K 23.5 C 16 25

69. 76 MS Slide-On 95° Ø35 for thick doors Technical speci fi cations: • Depth of the metal cup 11.3mm standard, 12.3mm Genios • Cup diameter 35mm • Opening 95° • Possibility of door drilling (K) from 3 to 7 mm • Thickness of the door (T) from 16 to 30 mm • Genios solutions I A D I A D 51.MT15.05.00.0 51.MT15.05.00.C 51.MT15.05.00.B 51.MT16.05.00.M 51.MT16.05.00.N 51.MT16.05.00.E 51.MT16.05.00. * 51.MT16.05.00.S 51.MT16.05.00.B 51.MT18.05.00.V 51.MT18.05.00.U 51.MT18.05.00.Z 51.MZ15.05.00.0 51.MZ15.05.00.C 51.MZ15.05.00.B 51.MZ16.05.00.M 51.MZ16.05.00.N 51.MZ16.05.00.E 51.MZ16.05.00.0 51.MZ16.05.00.S 51.MZ16.05.00.B 51.MZ18.05.00.V 51.MZ18.05.00.U 51.MZ18.05.00.Z CRANK 0 CRANK 4 51.MT15.05.04.0 51.MT15.05.04.C 51.MT15.05.04.B 51.MT16.05.04.M 51.MT16.05.04.N 51.MT16.05.04.E 51.MT16.05.04. * 51.MT16.05.04.S 51.MT16.05.04.B 51.MT18.05.04.V 51.MT18.05.04.U 51.MT18.05.04.Z 51.MZ15.05.04.0 51.MZ15.05.04.C 51.MZ15.05.04.B 51.MZ16.05.04.M 51.MZ16.05.04.N 51.MZ16.05.04.E 51.MZ16.05.04.0 51.MZ16.05.04.S 51.MZ16.05.04.B 51.MZ18.05.04.V 51.MZ18.05.04.U 51.MZ18.05.04.Z I A D I D A I A D Available with premounted selftapping screws The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107. * 0 = dowels Ø10mm / D = dowels Ø8mm = G / Genios Solution CRANKS 8, 15 TO PAGE 78 >>>

112. 119 Values given in mm HINGES 105° 105° CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors CRANK 15 For inset doors SPECIAL SOLUTIONS 3 4 5 6 19 0 18 0 17 0 2 16 0 2 15 2 4 14 2 4 13 4 6 12 4 6 11 6 10 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 11 0 10 0 9 0 2 8 0 2 7 2 4 6 2 4 5 4 6 4 4 6 3 6 2 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 0 2 4 1 2 4 2 4 6 3 4 6 4 6 5 6 Drilling distance (K) Overlay (C) Mounting plates (H)

70. 77 Values given in mm HINGES T= 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 A= 0.00 0.15 0.35 0.5 0.7 0.85 1.15 1.65 2.55 3.40 4.30 5.20 6.15 7.10 8.00 A= 0.00 0.15 0.30 0.50 0.65 0.85 1.10 1.40 2.10 2.90 3.80 4.65 5.50 6.45 7.40 A= 0.00 0.15 0.30 0.50 0.65 0.80 1.00 1.35 1.75 2.50 3.30 4.15 5.00 5.90 6.75 A= 0.00 0.10 0.30 0.45 0.65 0.80 1.00 1.30 1.65 2.15 2.90 3.65 4.50 5.40 6.05 A= 0.00 0.10 0.30 0.45 0.60 0.80 0.95 1.25 1.60 1.90 2.55 3.30 4.05 4.90 5.75 K=3 K=4 K=5 K=6 K=7 3 4 5 6 7 19 0 2 18 0 2 17 0 2 4 16 2 4 15 2 4 6 14 4 6 13 4 6 12 6 11 6 Drilling distance (K) Overlay (C) Mounting plates (H) CRANK 0 For lay-on doors CRANK 4 For partial lay-on doors Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. 95° 95° 3 4 5 6 7 15 0 2 14 0 2 13 0 2 4 12 2 4 11 2 4 6 10 4 6 9 4 6 8 6 7 6 Drilling distance (K) Overlay (C) Mounting plates (H) 8 12

75. 82 51.MS85.M5.45.0 51.MS85.M5.45.C 51.MS85.M5.45.B 51.MS86.M5.45.M 51.MS86.M5.45.N 51.MS86.M5.45.E 51.MS86.M5.45. * 51.MS86.M5.45.S 51.MS86.M5.45.B 51.MS88.M5.45.V 51.MS88.M5.45.U 51.MS88.M5.45.Z 51.MS89.M5.45.0 51.MS89.M5.45.S 51.MS89.M5.45.B 51.MS85.M5.90.0 51.MS85.M5.90.C 51.MS85.M5.90.B 51.MS86.M5.90.M 51.MS86.M5.90.N 51.MS86.M5.90.E 51.MS86.M5.90. * 51.MS86.M5.90.S 51.MS86.M5.90.B 51.MS88.M5.90.V 51.MS88.M5.90.U 51.MS88.M5.90.Z 51.MS89.M5.90.0 51.MS89.M5.90.S 51.MS89.M5.90.B MS Slide-On 110° for corner doors I A D ANGLE 45° ANGLE 90° I A D I A D I A D I D A The mounting plates and fi ttings for this hinge series are shown from page 100 to page 107. Available with premounted selftapping screws * 0 = dowels Ø10mm / D = dowels Ø8mm Technical speci fi cations: • Depth of the metal cup 11.3mm • Cup diameter 35mm • Opening 110° • Possibility of door drilling (K) from 3 to 7 mm • Thickness of the door (T) from 16 to 26 mm • Genios, SlowMotion Alfa and OneTouch solutions 51.MS85.05.30.0 51.MS85.05.30.C 51.MS85.05.30.B 51.MS86.05.30.M 51.MS86.05.30.N 51.MS86.05.30.E 51.MS86.05.30. * 51.MS86.05.30.S 51.MS86.05.30.B 51.MS88.05.30.V 51.MS88.05.30.U 51.MS88.05.30.Z 51.MS89.05.30.0 51.MS89.05.30.S 51.MS89.05.30.B ANGLE 24°÷30° <<<ANGLES -25°, +25° TO PAGE 80 I A D = G / Genios Solution

17. 24 D FOR CORNER DOORS 110° p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 Angle 24°÷30° Angle 45° Angle 90° FOR THICK DOORS OPENING 95° Ø35 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 Crank 0 Crank 8 Crank 15 OPENING 175° p. 30 p. 30 p. 30 p. 30 p. 30 p. 30 p. 30 p. 30 p. 30 p. 30 Crank 0 Crank 8 OPENING 125° p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 Crank 0 Crank 8 OPENING 110° p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 Crank 0 Crank 8 Crank 15 FOR CORNER CABINET p. 36 p. 36 p. 36 p. 36 p. 36 Cup hole distance 52x5.5mm SELFTA PPING SCREW DOWEL VELOFIX DOWEL X-PANDO DOWEL EURO SCREW

88. 95 Values given in mm HINGES CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors CRANK 15 For inset doors 105° 105° T= 19 20 21 22 23 24 25 26 A= 0.40 0.65 1.00 1.40 2.30 3.20 4.00 5.00 A= 0.40 0.60 0.80 1.20 1.70 2.60 3.40 4.30 A= 0.40 0.50 0.75 1.10 1.30 2.10 2.90 3.70 A= 0.40 0.50 0.75 1.00 1.30 1.80 2.50 3.30 A= 0.40 0.50 0.75 0.90 1.30 1.60 2.20 2.90 A= 0.30 0.50 0.70 0.90 1.20 1.55 2.00 2.60 A= 0.30 0.50 0.70 0.90 1.10 1.40 1.90 2.40 P=19 P=20 P=21 P=22 P=23 P=24 P=25 17 0 16 15 2 14 13 4 12 11 6 Drilling distance (K) Overlay (C) Mounting plates (H) 9 0 8 7 2 6 5 4 4 3 6 Drilling distance (K) Overlay (C) Mounting plates (H) 0 2 1 2 4 3 4 6 Drilling distance (K) Overlay (C) Mounting plates (H) Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. SPECIAL SOLUTIONS

22. 29 Values given in mm HINGES 3 4 5 6 7 19 2 18 2 17 2 4 16 2 4 15 2 4 6 14 4 6 13 4 6 12 6 11 6 Drilling distance (K) Overlay (C) Mounting plates (H) T= 16 17 18 19 20 21 22 23 24 25 26 A= 0.90 1.40 1.90 2.40 3.00 3.60 4.25 4.90 5.55 6.20 6.80 A= 0.85 1.25 1.75 2.25 2.75 3.35 4.00 4.65 5.30 5.95 6.60 A= 0.80 1.10 1.60 2.10 2.55 3.15 3.75 4.45 5.05 5.70 6.35 K=3 K=4 K=5 3 4 5 6 7 11 2 10 2 9 2 4 8 2 4 7 2 4 6 6 4 6 5 4 6 4 6 3 6 Drilling distance (K) Overlay (C) Mounting plates (H) CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. 125° 125° / * ( 2 ; /$    / * 2 ; ( /$   

27. 34 Optima Click 110° for corner doors Technical speci fi cations: • Depth of the metal cup 11.3mm • Cup diameter 35mm • Opening 110° • Possibility of door drilling (K) from 3 to 7 mm • Thickness of the door (T) from 16 to 26 mm • Genios and OneTouch solutions I D A 51.XH85.05.30.0 51.XH85.05.30.C 51.XH85.05.30.B 51.XH86.05.30.M 51.XH86.05.30.N 51.XH86.05.30.E 51.XH86.05.30. * 51.XH86.05.30.S 51.XH86.05.30.B 51.XH88.05.30.V 51.XH88.05.30.U 51.XH88.05.30.Z 51.XH89.05.30.0 51.XH89.05.30.S 51.XH89.05.30.B 51.XH8C.05.30.0 51.XH8C.05.30.0 51.XH85.05.45.0 51.XH85.05.45.C 51.XH85.05.45.B 51.XH86.05.45.M 51.XH86.05.45.N 51.XH86.05.45.E 51.XH86.05.45. * 51.XH86.05.45.S 51.XH86.05.45.B 51.XH88.05.45.V 51.XH88.05.45.U 51.XH88.05.45.Z 51.XH89.05.45.0 51.XH89.05.45.S 51.XH89.05.45.B 51.XH8C.05.45.0 51.XH8C.05.45.0 51.XH85.M5.90.0 51.XH85.M5.90.C 51.XH85.M5.90.B 51.XH86.M5.90.M 51.XH86.M5.90.N 51.XH86.M5.90.E 51.XH86.M5.90. * 51.XH86.M5.90.S 51.XH86.M5.90.B 51.XH88.M5.90.V 51.XH88.M5.90.U 51.XH88.M5.90.Z 51.XH89.M5.90.0 51.XH89.M5.90.S 51.XH89.M5.90.B 51.XH8C.M5.90.0 51.XH8C.M5.90.0 I A D I A D I A ANGLE 24°÷30° ANGLE 45° ANGLE 90° I A D I A D I A D = G / Genios Solution Available with premounted selftapping screws * 0 = dowels Ø10mm / D = dowels Ø8mm The mounting plates and fi ttings for this hinge series are shown from page 46 to page 59.

19. 26 51.XSH5.05.15.0 51.XSH5.05.15.C 51.XSH5.05.15.B 51.XSH6.05.15.M 51.XSH6.05.15.N 51.XSH6.05.15.E 51.XSH6.05.15. * 51.XSH6.05.15.S 51.XSH6.05.15.B 51.XSH8.05.15.V 51.XSH8.05.15.U 51.XSH8.05.15.Z 51.XSH9.05.15.0 51.XSH9.05.15.S 51.XSH9.05.15.B 51.XSHC.05.15.0 51.XSHC.05.15.0 51.XSH5.05.08.0 51.XSH5.05.08.C 51.XSH5.05.08.B 51.XSH6.05.08.M 51.XSH6.05.08.N 51.XSH6.05.08.E 51.XSH6.05.08. * 51.XSH6.05.08.S 51.XSH6.05.08.B 51.XSH8.05.08.V 51.XSH8.05.08.U 51.XSH8.05.08.Z 51.XSH9.05.08.0 51.XSH9.05.08.S 51.XSH9.05.08.B 51.XSHC.05.08.0 51.XSHC.05.08.0 Optima Click 110° Technical speci fi cations: • Depth of the metal cup 11.3mm • Cup diameter 35mm • Opening 110° with (K) max 4mm and (T) max 18mm • Possibility of door drilling (K) from 3 to 7 mm • Thickness of the door (T) from 16 to 26 mm • Genios, SlowMotion Alfa and OneTouch solutions I A D I A D I A D 51.XSH5.05.00.0 51.XSH5.05.00.C 51.XSH5.05.00.B 51.XSH6.05.00.M 51.XSH6.05.00.N 51.XSH6.05.00.E 51.XSH6.05.00. * 51.XSH6.05.00.S 51.XSH6.05.00.B 51.XSH8.05.00.V 51.XSH8.05.00.U 51.XSH8.05.00.Z 51.XSH9.05.00.0 51.XSH9.05.00.S 51.XSH9.05.00.B 51.XSHC.05.00.0 51.XSHC.05.00.0 I A CRANK 0 CRANK 8 CRANK 15 I A D I D A Available with premounted selftapping screws I A D = G / Genios Solution The mounting plates and fi ttings for this hinge series are shown from page 46 to page 59. * 0 = dowels Ø10mm / D = dowels Ø8mm

15. 22 Cup hole distance 48x6mm FOR CORNER DOORS 110° p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 Angle 24°÷30° Angle 45° Angle 90° FOR THICK DOORS OPENING 95° Ø35 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 Crank 0 Crank 8 Crank 15 OPENING 175° p. 30 p. 30 p. 30 p. 30 p. 30 p. 30 p. 30 p. 30 p. 30 p. 30 Crank 0 Crank 8 OPENING 125° p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 Crank 0 Crank 8 OPENING 110° p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 Crank 0 Crank 8 Crank 15 FOR CORNER CABINET p. 36 p. 36 p. 36 p. 36 p. 36 I SELFTA PPING SCREW EURO SCREW DOWEL VELOFIX DOWEL X-PANDO DOWEL CENTRA

16. 23 Values given in mm HINGES A Cup hole distance 45x9.5mm FOR CORNER DOORS 110° p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 p. 34 Angle 24°÷30° Angle 45° Angle 90° FOR THICK DOORS OPENING 95° Ø35 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 p. 32 Crank 0 Crank 8 Crank 15 OPENING 175° p. 30 p. 30 p. 30 p. 30 p. 30 p. 30 p. 30 p. 30 p. 30 p. 30 Crank 0 Crank 8 OPENING 125° p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 p. 28 Crank 0 Crank 8 OPENING 110° p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 p. 26 Crank 0 Crank 8 Crank 15 FOR CORNER CABINET p. 36 p. 36 p. 36 p. 36 p. 36 SELFTA PPING SCREW EURO SCREW DOWEL VELOFIX DOWEL X-PANDO DOWEL CENTRA 8

24. 31 Values given in mm HINGES T= 16 17 18 19 20 21 22 23 24 25 26 A= 0.00 0.00 0.00 0.00 0.00 0.00 0.20 0.55 6.80 8.10 13.55 A= 0.00 0.00 0.00 0.00 0.00 0.05 0.30 3.50 5.85 7.25 12.55 A= 0.00 0.00 0.00 0.00 0.00 0.05 0.30 3.55 4.90 6.25 11.55 A= 0.00 0.00 0.00 0.00 0.00 0.05 0.40 3.00 3.90 5.25 10.55 A= 0.00 0.00 0.00 0.00 0.00 0.05 1.20 2.20 3.15 4.25 9.55 K=3 K=4 K=5 K=6 K=7 /$ 2 ; *(   /$  2$ /$  TH_   /$ 2 ; *(   /$   TH_ 2$ /$  3 4 5 6 7 19 2 18 2 17 2 4 16 2 4 15 2 4 6 14 4 6 13 4 6 12 6 11 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 7 11 2 10 2 9 2 4 8 2 4 7 2 4 6 6 4 6 5 4 6 4 6 3 6 Drilling distance (K) Overlay (C) Mounting plates (H) CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. 175° 175°

116. 123 Values given in mm HINGES CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors CRANK 15 For inset doors SPECIAL SOLUTIONS 105° 105° 3 4 5 6 19 0 18 0 17 0 2 16 0 2 15 2 4 14 2 4 13 4 6 12 4 6 11 6 10 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 11 0 10 0 9 0 2 8 0 2 7 2 4 6 2 4 5 4 6 4 4 6 3 6 2 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 0 2 4 1 2 4 2 4 6 3 4 6 4 6 5 6 Drilling distance (K) Overlay (C) Mounting plates (H) ( / T C K H=2 3.5 47.5 A C K 11.5 / T H=2 47.5 C K H=6 22.5 / T 47.5

34. 41 Values given in mm HINGES CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors CRANK 15 For inset doors 105° 105° T= 16 17 18 19 20 21 22 23 24 25 26 A= 0.55 0.75 1.10 1.45 1.80 2.40 3.10 3.90 4.70 6.70 6.50 A= 0.55 0.70 1.05 1.40 1.75 2.25 2.85 3.60 4.35 5.75 6.00 A= 0.53 0.70 1.00 1.35 1.65 2.10 2.65 3.30 4.00 4.75 5.55 A= 0.50 0.70 0.95 1.25 1.60 2.00 2.50 3.05 3.70 4.40 5.20 A= 0.50 0.65 0.85 1.20 1.55 1.90 2.35 2.85 3.45 4.10 4.80 K=3 K=4 K=5 K=6 K=7 Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. 3 4 5 6 7 19 2 18 2 17 2 4 16 2 4 15 2 4 6 14 4 6 13 4 6 12 6 11 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 7 11 2 10 2 9 2 4 8 2 4 7 2 4 6 6 4 6 5 4 6 4 6 3 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 7 0 2 4 6 1 4 6 2 4 6 3 6 4 6 Drilling distance (K) Overlay (C) Mounting plates (H) SPECIAL SOLUTIONS

94. 101 Values given in mm HINGES Metal cruciform mounting plate. Fixing by expanding X-Pando dowels Ø5mm. Vertical adjustment. Ø5 37 * 1 = 3 = 9.2 7.5 Height Material Code H=0 Steel 52.C2N5.M5.00. * H=2 Steel 52.02N5.M5.02. * H=4 Steel 52.02N5.M5.04. * H=6 Steel 52.02N5.M5.06. * H=10 Zamak 52.02N5.05.10. * = R / Genios Retro fi t Solution G / Genios Integrated Solution Available only for dowel 9.2 Metal cruciform mounting plate. Premounted selftapping screws Ø4.7mm. Vertical adjustment. Ø3 37 Height Material Code H=0 Steel 52.C2G5.M5.00.1 H=2 Steel 52.02G5.M5.02.1 H=4 Steel 52.02G5.M5.04.1 H=6 Steel 52.02G5.M5.06.1 = R / Genios Retro fi t Solution G / Genios Integrated Solution Metal cruciform mounting plate. Knock-in fi xing with dowels Ø10mm. Vertical adjustment. Ø10 = R / Genios Retro fi t Solution G / Genios Integrated Solution Available only for dowel 10.8 * D = F = 10.8 8.5 Height Material Code H=0 Steel 52.C2 * 5.M5.00.1 H=2 Steel 52.02 * 5.M5.02.1 H=4 Steel 52.02 * 5.M5.04.1 H=6 Steel 52.02 * 5.M5.06.1 H=10 Zamak 52.02 * 5.05.10.1 37 Metal cruciform mounting plate. Knock-in fi xing with dowels Ø8mm. Vertical adjustment. Ø8 = R / Genios Retro fi t Solution G / Genios Integrated Solution Available only for dowel 10.8 * C = E = 10.8 7.5 Height Material Code H=0 Steel 52.C2 * 5.M5.00.1 H=2 Steel 52.02 * 5.M5.02.1 H=4 Steel 52.02 * 5.M5.04.1 H=6 Steel 52.02 * 5.M5.06.1 H=10 Zamak 52.02 * 5.05.10.1 37 MOUNTING PLATES

108. 115 Values given in mm HINGES 105° 105° T= 16 17 18 19 20 21 22 23 24 25 26 A= 1.60 2.25 30 3.85 4.70 5.60 6.50 7.40 8.35 9.30 10.20 A= 1.55 2.10 2.75 3.50 4.30 5.15 6.00 6.90 7.80 8.70 9.65 A= 1.45 1.90 2.50 3.15 3.90 4.70 5.50 6.35 7.25 8.15 9.05 A= 1.40 1.80 2.30 2.90 3.55 4.30 5.10 5.90 6.75 7.60 8.50 K=3 K=4 K=5 K=6 Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors CRANK 15 For inset doors 3 4 5 6 19 0 18 0 17 0 2 16 0 2 15 2 4 14 2 4 13 4 6 12 4 6 11 6 10 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 11 0 10 0 9 0 2 8 0 2 7 2 4 6 2 4 5 4 6 4 4 6 3 6 2 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 0 2 4 1 2 4 2 4 6 3 4 6 4 6 5 6 Drilling distance (K) Overlay (C) Mounting plates (H)

86. 93 Values given in mm HINGES CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors CRANK 15 For inset doors 90° 90° T= 16 17 18 19 20 21 22 23 24 25 26 A= 0.80 1.45 2.15 3.10 3.90 4.85 5.75 6.70 7.65 8.60 9.55 A= 0.75 1.25 1.75 2.55 3.30 4.20 5.10 6.05 7.00 7.95 8.85 A= 0.65 1.05 1.40 2.20 2.95 3.75 4.55 5.45 6.35 7.25 8.20 K=3 K=4 K=5 Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. 3 4 5 6 19 0 18 0 17 0 2 16 0 2 15 2 4 14 2 4 13 4 6 12 4 6 11 6 10 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 11 0 10 0 9 0 2 8 0 2 7 2 4 6 2 4 5 4 6 4 4 6 3 6 2 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 0 2 4 1 2 4 2 4 6 3 4 6 4 6 5 6 Drilling distance (K) Overlay (C) Mounting plates (H) SPECIAL SOLUTIONS

32. 39 Values given in mm HINGES CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors CRANK 15 For inset doors 105° 105° T= 19 20 21 22 23 24 25 26 A= 0.40 0.65 1.00 1.40 2.30 3.20 4.00 5.00 A= 0.40 0.60 0.80 1.20 1.70 2.60 3.40 4.30 A= 0.40 0.50 0.75 1.10 1.30 2.10 2.90 3.70 A= 0.40 0.50 0.75 1.00 1.30 1.80 2.50 3.30 A= 0.40 0.50 0.75 0.90 1.30 1.60 2.20 2.90 A= 0.30 0.50 0.70 0.90 1.20 1.55 2.00 2.60 A= 0.30 0.50 0.70 0.90 1.10 1.40 1.90 2.40 P=19 P=20 P=21 P=22 P=23 P=24 P=25 15 2 14 13 4 12 11 6 Drilling distance (K) Overlay (C) Mounting plates (H) 7 2 6 5 4 4 3 6 Drilling distance (K) Overlay (C) Mounting plates (H) 0 2 1 2 4 3 4 6 Drilling distance (K) Overlay (C) Mounting plates (H) Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. SPECIAL SOLUTIONS 7 ; * / / * 7 ; /$     / * 7 ; /$    /$    

84. 91 Values given in mm HINGES T= 16 17 18 19 20 21 22 23 24 25 26 A= 0.80 1.45 2.15 3.10 3.90 4.85 5.75 6.70 7.65 8.60 9.55 A= 0.75 1.25 1.75 2.55 3.30 4.20 5.10 6.05 7.00 7.95 8.85 A= 0.65 1.05 1.40 2.20 2.95 3.75 4.55 5.45 6.35 7.25 8.20 K=3 K=4 K=5 3 4 5 6 19 0 18 0 17 0 2 16 0 2 15 2 4 14 2 4 13 4 6 12 4 6 11 6 10 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 11 0 10 0 9 0 2 8 0 2 7 2 4 6 2 4 5 4 6 4 4 6 3 6 2 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 0 2 4 1 2 4 2 4 6 3 4 6 4 6 5 6 Drilling distance (K) Overlay (C) Mounting plates (H) CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors CRANK 15 For inset doors Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. 90° 90° SPECIAL SOLUTIONS

57. 64 I Cup hole distance 48x6mm OPENING 110° p. 68 p. 68 p. 70 p. 70 p. 68 p. 68 p. 70 p. 70 p. 68 p. 68 p. 70 p. 70 p. 68 p. 68 p. 70 p. 70 p. 68 p. 68 p. 70 p. 70 Crank 0 Crank 4 Crank 8 Crank 15 OPENING 125° OPENING 175° p. 72 p. 72 p. 74 p. 74 p. 72 p. 72 p. 74 p. 74 p. 72 p. 72 p. 74 p. 74 p. 72 p. 72 p. 74 p. 74 Crank 0 Crank 0 Crank 8 Crank 8 FOR THICK DOORS STANDARD OPENING 95° Ø35 p. 76 p. 76 p. 78 p. 78 p. 76 p. 76 p. 78 p. 78 p. 76 p. 76 p. 78 p. 78 p. 76 p. 76 p. 78 p. 78 Crank 0 Crank 4 Crank 8 Crank 15 FOR CORNER CABINET p. 84 p. 84 p. 84 p. 84 FOR CORNER DOORS 110° p. 80 p. 80 p. 82 p. 82 p. 82 p. 80 p. 80 p. 82 p. 82 p. 82 p. 80 p. 80 p. 82 p. 82 p. 82 p. 80 p. 80 p. 82 p. 82 p. 82 p. 82 p. 82 p. 82 Angle +25° Angle -25° Angle 24°÷30° Angle 45° Angle 90° SELFTA PPING SCREW DOWEL VELOFIX DOWEL X-PANDO DOWEL EURO SCREW

59. 66 Cup hole distance 52x5.5mm D OPENING 110° p. 68 p. 68 p. 70 p. 70 p. 68 p. 68 p. 70 p. 70 p. 68 p. 68 p. 70 p. 70 p. 68 p. 68 p. 70 p. 70 p. 68 p. 68 p. 70 p. 70 Crank 0 Crank 4 Crank 8 Crank 15 OPENING 125° OPENING 175° p. 72 p. 72 p. 74 p. 74 p. 72 p. 72 p. 74 p. 74 p. 72 p. 72 p. 74 p. 74 p. 72 p. 72 p. 74 p. 74 Crank 0 Crank 0 Crank 8 Crank 8 FOR THICK DOORS STANDARD OPENING 95° Ø35 p. 76 p. 76 p. 78 p. 78 p. 76 p. 76 p. 78 p. 78 p. 76 p. 76 p. 78 p. 78 p. 76 p. 76 p. 78 p. 78 Crank 0 Crank 4 Crank 8 Crank 15 FOR CORNER CABINET p. 84 p. 84 p. 84 p. 84 FOR CORNER DOORS 110° p. 80 p. 80 p. 82 p. 82 p. 82 p. 80 p. 80 p. 82 p. 82 p. 82 p. 80 p. 80 p. 82 p. 82 p. 82 p. 80 p. 80 p. 82 p. 82 p. 82 p. 82 p. 82 p. 82 Angle +25° Angle -25° Angle 24°÷30° Angle 45° Angle 90° SELFTA PPING SCREW DOWEL VELOFIX DOWEL X-PANDO DOWEL EURO SCREW

58. 65 Values given in mm HINGES A Cup hole distance 45x9.5mm OPENING 110° p. 68 p. 68 p. 70 p. 70 p. 68 p. 68 p. 70 p. 70 p. 68 p. 68 p. 70 p. 70 p. 68 p. 68 p. 70 p. 70 p. 68 p. 68 p. 70 p. 70 Crank 0 Crank 4 Crank 8 Crank 15 OPENING 125° OPENING 175° p. 72 p. 72 p. 74 p. 74 p. 72 p. 72 p. 74 p. 74 p. 72 p. 72 p. 74 p. 74 p. 72 p. 72 p. 74 p. 74 Crank 0 Crank 0 Crank 8 Crank 8 FOR THICK DOORS STANDARD OPENING 95° Ø35 p. 76 p. 76 p. 78 p. 78 p. 76 p. 76 p. 78 p. 78 p. 76 p. 76 p. 78 p. 78 p. 76 p. 76 p. 78 p. 78 Crank 0 Crank 4 Crank 8 Crank 15 FOR CORNER CABINET p. 84 p. 84 p. 84 p. 84 FOR CORNER DOORS 110° p. 80 p. 80 p. 82 p. 82 p. 82 p. 80 p. 80 p. 82 p. 82 p. 82 p. 80 p. 80 p. 82 p. 82 p. 82 p. 80 p. 80 p. 82 p. 82 p. 82 p. 82 p. 82 p. 82 Angle +25° Angle -25° Angle 24°÷30° Angle 45° Angle 90° SELFTA PPING SCREW DOWEL Ø8 VELOFIX DOWEL X-PANDO DOWEL Ø8 EURO SCREW

82. 89 Values given in mm HINGES 90° 90° Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. K=3 K=4 K=5 K=6 K=7 K=8 K=9 K=10 K=11 K=12 K=13 K=14* K=15 • T= 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 A= 0.20 0.35 0.55 0.70 0.9 1.05 1.25 1.40 1.60 2.25 3.20 4.15 5.05 6.05 7.00 8.00 9.00 9.95 10.95 11.95 12.95 A= 0.20 0.35 0.50 0.70 0.85 1.05 1.20 1.40 1.55 1.75 2.55 3.45 4.40 5.35 6.30 7.25 8.15 9.15 10.15 11.10 12.10 A= 0.15 0.35 0.50 0.70 0.85 1.05 1.20 1.40 1.55 1.70 2.05 2.80 3.75 4.70 5.65 6.55 7.50 8.45 9.40 10.35 11.25 A= 0.15 0.30 0.50 0.65 0.85 1.00 1.20 1.35 1.55 1.70 2.00 2.30 3.10 4.05 4.95 5.90 6.85 7.80 8.75 9.65 10.60 A= 0.15 0.30 0.50 0.65 0.85 1.00 1.15 1.35 1.50 1.70 1.90 2.25 2.60 3.50 4.35 5.25 6.20 7.15 8.05 9.00 9.95 A= 0.10 0.30 0.45 0.65 0.8 1.00 1.15 1.35 1.50 1.70 1.85 2.20 2.55 3.00 3.85 4.70 5.60 6.50 7.40 8.35 9.30 A= 0.10 0.25 0.45 0.60 0.8 0.95 1.15 1.30 1.50 1.65 1.85 2.15 2.50 2.80 3.35 4.20 5.10 5.95 6.80 7.70 8.65 A= 0.10 0.25 0.45 0.60 0.8 0.95 1.15 1.30 1.50 1.65 1.85 2.10 2.40 2.75 3.10 3.70 4.60 5.45 6.30 7.20 8.05 A= 0.05 0.25 0.40 0.60 0.75 0.95 1.10 1.30 1.45 1.60 1.80 2.00 2.35 2.70 3.05 3.40 4.10 4.95 5.80 6.70 7.55 A= 0.05 0.25 0.40 0.60 0.75 0.90 1.10 1.25 1.45 1.60 1.80 1.95 2.30 2.65 3.00 3.35 3.75 4.50 5.30 6.20 7.05 A= 0.05 0.20 0.40 0.55 0.75 0.90 1.10 1.25 1.45 1.60 1.80 1.95 2.25 2.60 2.90 3.25 3.60 4.15 4.90 5.70 6.55 A= 0.05 0.20 0.40 0.55 0.70 0.90 1.05 1.25 1.40 1.60 1.75 1.95 2.10 2.50 2.85 3.20 3.55 3.90 4.55 5.35 6.05 A= 0.00 0.02 0.35 0.55 0.70 0.90 1.05 1.25 1.40 1.55 1.75 1.90 2.10 2.45 2.80 3.15 3.50 3.85 4.25 4.95 5.75 * L= 0,77 • L= 1,76 CRANK 15 For lay-on doors CRANK 22 For partial lay-on doors Drilling distance (K) Overlay (C) Mounting plates (H) 4 5 6 7 8 9 10 11 12 13 14 15 17 0 2 16 0 2 15 0 2 4 14 0 2 4 13 0 2 4 6 12 0 2 4 6 11 0 2 4 6 10 0 2 4 6 9 0 2 4 6 8 0 2 4 6 7 2 4 6 6 2 4 6 5 4 6 4 4 6 3 6 2 6 Drilling distance (K) Overlay (C) Mounting plates (H) 4 5 6 7 8 9 10 0 2 4 6 1 2 4 6 2 4 6 3 4 6 4 6 5 6 6 SPECIAL SOLUTIONS

90. 97 Values given in mm HINGES CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors CRANK 15 For inset doors 105° 105° 0.55 0.75 1.10 1.45 1.80 2.40 3.10 3.90 4.70 6.70 6.50 0.55 0.70 1.05 1.40 1.75 2.25 2.85 3.60 4.35 5.75 6.00 0.53 0.70 1.00 1.35 1.65 2.10 2.65 3.30 4.00 4.75 5.55 0.50 0.70 0.95 1.25 1.60 2.00 2.50 3.05 3.70 4.40 5.20 0.50 0.65 0.85 1.20 1.55 1.90 2.35 2.85 3.45 4.10 4.80 K=3 K=4 K=5 K=6 K=7 Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. 3 4 5 6 7 19 2 18 2 17 2 4 16 2 4 15 2 4 6 14 4 6 13 4 6 12 6 11 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 7 11 2 10 2 9 2 4 8 2 4 7 2 4 6 6 4 6 5 4 6 4 6 3 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 7 0 2 4 6 1 4 6 2 4 6 3 6 4 6 Drilling distance (K) Overlay (C) Mounting plates (H) T= 16 17 18 19 20 22 23 24 25 26 27 A= A= A= A= A= SPECIAL SOLUTIONS  H=2 H H H=2 A 14.5 K C H C 25.5 T K H=6

38. 45 Values given in mm HINGES CRANK 15 For partial lay-on doors CRANK 22 For inset doors SPECIAL SOLUTIONS 90° 90° Drilling distance (K) Overlay (C) Mounting plates (H) 4 5 6 7 8 9 10 11 12 13 14 15 17 0 2 16 0 2 15 0 2 4 14 0 2 4 13 0 2 4 6 12 0 2 4 6 11 0 2 4 6 10 0 2 4 6 9 0 2 4 6 8 0 2 4 6 7 2 4 6 6 2 4 6 5 4 6 4 4 6 3 6 2 6 Drilling distance (K) Overlay (C) Mounting plates (H) 4 5 6 7 8 9 10 11 12 0 2 4 6 1 2 4 6 2 4 6 3 4 6 4 6 5 6 6 7 Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. K=3 K=4 K=5 K=6 K=7 K=8 K=9 K=10 K=11 K=12 K=13 K=14* K=15 • T= 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 A= 0.20 0.35 0.55 0.70 0.90 1.05 1.25 1.40 1.60 2.25 3.20 4.15 5.05 6.05 7.00 8.00 9.00 9.95 10.95 11.95 12.95 A= 0.20 0.35 0.50 0.70 0.85 1.05 1.20 1.40 1.55 1.75 2.55 3.45 4.40 5.35 6.30 7.25 8.15 9.15 10.15 11.10 12.10 A= 0.15 0.35 0.50 0.70 0.85 1.05 1.20 1.40 1.55 1.70 2.05 2.80 3.75 4.70 5.65 6.55 7.50 8.45 9.40 10.35 11.25 A= 0.15 0.30 0.50 0.65 0.85 1.00 1.20 1.35 1.55 1.70 2.00 2.30 3.10 4.05 4.95 5.90 6.85 7.80 8.75 9.65 10.60 A= 0.15 0.30 0.50 0.65 0.85 1.00 1.15 1.35 1.50 1.70 1.90 2.25 2.60 3.50 4.35 5.25 6.20 7.15 8.05 9.00 9.95 A= 0.10 0.30 0.45 0.65 0.80 1.00 1.15 1.35 1.50 1.70 1.85 2.20 2.55 3.00 3.85 4.70 5.60 6.50 7.40 8.35 9.30 A= 0.10 0.25 0.45 0.60 0.80 0.95 1.15 1.30 1.50 1.65 1.85 2.15 2.50 2.80 3.35 4.20 5.10 5.95 6.80 7.70 8.65 A= 0.10 0.25 0.45 0.60 0.80 0.95 1.15 1.30 1.50 1.65 1.85 2.10 2.40 2.75 3.10 3.70 4.60 5.45 6.30 7.20 8.05 A= 0.05 0.25 0.40 0.60 0.75 0.95 1.10 1.30 1.45 1.60 1.80 2.00 2.35 2.70 3.05 3.40 4.10 4.95 5.80 6.70 7.55 A= 0.05 0.25 0.40 0.60 0.75 0.90 1.10 1.25 1.45 1.60 1.80 1.95 2.30 2.65 3.00 3.35 3.75 4.50 5.30 6.20 7.05 A= 0.05 0.20 0.40 0.55 0.75 0.90 1.10 1.25 1.45 1.60 1.80 1.95 2.25 2.60 2.90 3.25 3.60 4.15 4.90 5.70 6.55 A= 0.05 0.20 0.40 0.55 0.70 0.90 1.05 1.25 1.40 1.60 1.75 1.95 2.10 2.50 2.85 3.20 3.55 3.90 4.55 5.35 6.05 A= 0.00 0.20 0.35 0.55 0.70 0.90 1.05 1.25 1.40 1.55 1.75 1.90 2.10 2.45 2.80 3.15 3.50 3.85 4.25 4.95 5.75 * L= 0,77 • L= 1,76

20. 27 Values given in mm HINGES T= 16 17 18 19 20 21 22 23 24 25 26 A= 0.55 0.75 1.10 1.45 1.80 2.40 3.10 3.90 4.70 6.70 6.50 A= 0.55 0.70 1.05 1.40 1.75 2.25 2.85 3.60 4.35 5.75 6.00 A= 0.53 0.70 1.00 1.35 1.65 2.10 2.65 3.30 4.00 4.75 5.55 A= 0.50 0.70 0.95 1.25 1.60 2.00 2.50 3.05 3.70 4.40 5.20 A= 0.50 0.65 0.85 1.20 1.55 1.90 2.35 2.85 3.45 4.10 4.80 K=3 K=4 K=5 K=6 K=7 Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. 110° 110° CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors CRANK 15 For inset doors 3 4 5 6 7 19 2 18 2 17 2 4 16 2 4 15 2 4 6 14 4 6 13 4 6 12 6 11 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 7 11 2 10 2 9 2 4 8 2 4 7 2 4 6 6 4 6 5 4 6 4 6 3 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 7 0 2 4 6 1 4 6 2 4 6 3 6 4 6 Drilling distance (K) Overlay (C) Mounting plates (H) / * 2 ; /$    ( / * 2 ; /$    ( / *$( 2 ; /$   

36. 43 Values given in mm HINGES CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors 90° 90° Drilling distance (K) Overlay (C) Mounting plates (H) 4 5 6 7 8 9 10 11 12 13 14 15 32 0 2 31 0 2 30 0 2 4 29 0 2 4 28 0 2 4 6 27 0 2 4 6 26 0 2 4 6 25 0 2 4 6 24 0 2 4 6 23 0 2 4 6 22 2 4 6 21 2 4 6 20 4 6 19 4 6 18 6 17 6 Drilling distance (K) Overlay (C) Mounting plates (H) 4 5 6 7 8 9 10 11 12 13 14 15 24 0 2 23 0 2 22 0 2 4 21 0 2 4 20 0 2 4 6 19 0 2 4 6 18 0 2 4 6 17 0 2 4 6 16 0 2 4 6 15 0 2 4 6 14 2 4 6 13 2 4 6 12 4 6 11 4 6 10 6 9 6 Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. T= 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 A= A= A= A= A= A= A= A= A= A= A= A= A= 0.20 0.35 0.55 0.70 0.90 1.05 1.25 1.40 1.60 2.25 3.20 4.15 5.05 6.05 7.00 8.00 9.00 9.95 10.95 11.95 12.95 0.20 0.35 0.50 0.70 0.85 1.05 1.20 1.40 1.55 1.75 2.55 3.45 4.40 5.35 6.30 7.25 8.15 9.15 10.15 11.10 12.10 0.15 0.35 0.50 0.70 0.85 1.05 1.20 1.40 1.55 1.70 2.05 2.80 3.75 4.70 5.65 6.55 7.50 8.45 9.40 10.35 11.25 0.15 0.30 0.50 0.65 0.85 1.00 1.20 1.35 1.55 1.70 2.00 2.30 3.10 4.05 4.95 5.90 6.85 7.80 8.75 9.65 10.60 0.15 0.30 0.50 0.65 0.85 1.00 1.15 1.35 1.50 1.70 1.90 2.25 2.60 3.50 4.35 5.25 6.20 7.15 8.05 9.00 9.95 0.10 0.30 0.45 0.65 0.80 1.00 1.15 1.35 1.50 1.70 1.85 2.20 2.55 3.00 3.85 4.70 5.60 6.50 7.40 8.35 9.30 0.10 0.25 0.45 0.60 0.80 0.95 1.15 1.30 1.50 1.65 1.85 2.15 2.50 2.80 3.35 4.20 5.10 5.95 6.80 7.70 8.65 0.10 0.25 0.45 0.60 0.80 0.95 1.15 1.30 1.50 1.65 1.85 2.10 2.40 2.75 3.10 3.70 4.60 5.45 6.30 7.20 8.05 0.05 0.25 0.40 0.60 0.75 0.95 1.10 1.30 1.45 1.60 1.80 2.00 2.35 2.70 3.05 3.40 4.10 4.95 5.80 6.70 7.55 0.05 0.25 0.40 0.60 0.75 0.90 1.10 1.25 1.45 1.60 1.80 1.95 2.30 2.65 3.00 3.35 3.75 4.50 5.30 6.20 7.05 0.05 0.20 0.40 0.55 0.75 0.90 1.10 1.25 1.45 1.60 1.80 1.95 2.25 2.60 2.90 3.25 3.60 4.15 4.90 5.70 6.55 0.05 0.20 0.40 0.55 0.70 0.90 1.05 1.25 1.40 1.60 1.75 1.95 2.10 2.50 2.85 3.20 3.55 3.90 4.55 5.35 6.05 0.00 0.20 0.35 0.55 0.70 0.90 1.05 1.25 1.40 1.55 1.75 1.90 2.10 2.45 2.80 3.15 3.50 3.85 4.25 4.95 5.75 * L= 0,77 • L= 1,76 K=3 K=4 K=5 K=6 K=7 K=8 K=9 K=10 K=11 K=12 K=13 K=14* K=15 • SPECIAL SOLUTIONS

26. 33 Values given in mm HINGES T= 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 A= 0.00 0.15 0.35 0.50 0.70 0.85 1.15 1.65 2.55 3.40 4.30 5.20 6.15 7.10 8.00 A= 0.00 0.15 0.30 0.50 0.65 0.85 1.10 1.40 2.10 2.90 3.80 4.65 5.50 6.45 7.40 A= 0.00 0.15 0.30 0.50 0.65 0.80 1.00 1.35 1.75 2.50 3.30 4.15 5.00 5.90 6.75 A= 0.00 0.10 0.30 0.45 0.65 0.80 1.00 1.30 1.65 2.15 2.90 3.65 4.50 5.40 6.05 A= 0.00 0.10 0.30 0.45 0.60 0.80 0.95 1.25 1.60 1.90 2.55 3.30 4.05 4.90 5.75 K=3 K=4 K=5 K=6 K=7 3 4 5 6 7 11 0 2 10 0 2 9 0 2 4 8 2 4 7 2 4 6 6 4 6 5 4 6 4 6 3 6 Drilling distance (K) Overlay (C) Mounting plates (H) 3 4 5 6 7 0 2 4 6 1 4 6 2 4 6 3 6 4 6 Drilling distance (K) Overlay (C) Mounting plates (H) Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. 95° 95° 3 4 5 6 7 19 0 2 18 0 2 17 0 2 4 16 2 4 15 2 4 6 14 4 6 13 4 6 12 6 11 6 CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors CRANK 15 For inset doors Drilling distance (K) Overlay (C) Mounting plates (H) / * 2 ; /$    ( / *$( 2 ; /$    / * 2 ; /$    ( 8 16 25

80. 87 Values given in mm HINGES 90° 90° Table to determinate the minimum distance A so that a door with T thickness can open without protrusion from the cabinet and without interfering with adjacent doors. K=3 K=4 K=5 K=6 K=7 K=8 K=9 K=10 K=11 K=12 K=13 K=14* K=15 • T= 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 A= 0.20 0.35 0.55 0.70 0.9 1.05 1.25 1.40 1.60 2.25 3.20 4.15 5.05 6.05 7.00 8.00 9.00 9.95 10.95 11.95 12.95 A= 0.20 0.35 0.50 0.70 0.85 1.05 1.20 1.40 1.55 1.75 2.55 3.45 4.40 5.35 6.30 7.25 8.15 9.15 10.15 11.10 12.10 A= 0.15 0.35 0.50 0.70 0.85 1.05 1.20 1.40 1.55 1.70 2.05 2.80 3.75 4.70 5.65 6.55 7.50 8.45 9.40 10.35 11.25 A= 0.15 0.30 0.50 0.65 0.85 1.00 1.20 1.35 1.55 1.70 2.00 2.30 3.10 4.05 4.95 5.90 6.85 7.80 8.75 9.65 10.60 A= 0.15 0.30 0.50 0.65 0.85 1.00 1.15 1.35 1.50 1.70 1.90 2.25 2.60 3.50 4.35 5.25 6.20 7.15 8.05 9.00 9.95 A= 0.10 0.30 0.45 0.65 0.8 1.00 1.15 1.35 1.50 1.70 1.85 2.20 2.55 3.00 3.85 4.70 5.60 6.50 7.40 8.35 9.30 A= 0.10 0.25 0.45 0.60 0.8 0.95 1.15 1.30 1.50 1.65 1.85 2.15 2.50 2.80 3.35 4.20 5.10 5.95 6.80 7.70 8.65 A= 0.10 0.25 0.45 0.60 0.8 0.95 1.15 1.30 1.50 1.65 1.85 2.10 2.40 2.75 3.10 3.70 4.60 5.45 6.30 7.20 8.05 A= 0.05 0.25 0.40 0.60 0.75 0.95 1.10 1.30 1.45 1.60 1.80 2.00 2.35 2.70 3.05 3.40 4.10 4.95 5.80 6.70 7.55 A= 0.05 0.25 0.40 0.60 0.75 0.90 1.10 1.25 1.45 1.60 1.80 1.95 2.30 2.65 3.00 3.35 3.75 4.50 5.30 6.20 7.05 A= 0.05 0.20 0.40 0.55 0.75 0.90 1.10 1.25 1.45 1.60 1.80 1.95 2.25 2.60 2.90 3.25 3.60 4.15 4.90 5.70 6.55 A= 0.05 0.20 0.40 0.55 0.70 0.90 1.05 1.25 1.40 1.60 1.75 1.95 2.10 2.50 2.85 3.20 3.55 3.90 4.55 5.35 6.05 A= 0.00 0.02 0.35 0.55 0.70 0.90 1.05 1.25 1.40 1.55 1.75 1.90 2.10 2.45 2.80 3.15 3.50 3.85 4.25 4.95 5.75 * L= 0,77 • L= 1,76 CRANK 0 For lay-on doors CRANK 8 For partial lay-on doors Drilling distance (K) Overlay (C) Mounting plates (H) 4 5 6 7 8 9 10 11 12 13 14 15 32 0 2 31 0 2 30 0 2 4 29 0 2 4 28 0 2 4 6 27 0 2 4 6 26 0 2 4 6 25 0 2 4 6 24 0 2 4 6 23 0 2 4 6 22 2 4 6 21 2 4 6 20 4 6 19 4 6 18 6 17 6 Drilling distance (K) Overlay (C) Mounting plates (H) 4 5 6 7 8 9 10 11 12 13 14 15 24 0 2 23 0 2 22 0 2 4 21 0 2 4 20 0 2 4 6 19 0 2 4 6 18 0 2 4 6 17 0 2 4 6 16 0 2 4 6 15 0 2 4 6 14 2 4 6 13 2 4 6 12 4 6 11 4 6 10 6 9 6 SPECIAL SOLUTIONS

Rodiniai

  • 1193 Iš viso peržiūrų
  • 951 Tinklalapio peržiūros
  • 242 Įterptos peržiūros

Veiksmai

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Komentarai

Pasidalinimų skaičius

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Įterpiniai 8

  • 83 www.jurga.lt
  • 4 mail.jurga.lt
  • 6 www.google.com
  • 10 jurga.lt
  • 2 erp.jurga.lt
  • 3 ww.jurga.lt
  • 2 ww.w.jurga.lt
  • 1 w.jurga.lt